Allis Suitcase Weights
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=56959
Printed Date: 14 Dec 2025 at 5:03pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis Suitcase Weights
Posted By: Dave (NE)
Subject: Allis Suitcase Weights
Date Posted: 16 Sep 2012 at 7:45pm
|
I have been looking for some suitcase weights for my one-sixty. From some previous information I understood that I needed those with casting number 255444 (same as what the one-seventy would have). I have located some with casting number 255861. Based upon Brian Ahart's web site, the 255861 would be for the 200/210/220 tractors. However, I am told these 255861 came off a 185. Does anyone know whether the 255861 weights would work on the one-sixty? It has the factory weight bracket. Thanks, Dave
|
Replies:
Posted By: Luke R.
Date Posted: 16 Sep 2012 at 8:00pm
I dont know if they will work but i sent you a pm.
-------------
4-7030's,170G,220FWA,3-220's,210,D21II,D21I industrial,2-200's,3-190's,175D,2-D19D's,D19G,WD45,WD,CA,2-UCont.,5015FWA,917,B110,Gleaner F
|
Posted By: Luke R.
Date Posted: 16 Sep 2012 at 8:04pm
Orange knight had some 160 weights for sale awhile back on the classified adds a while back
-------------
4-7030's,170G,220FWA,3-220's,210,D21II,D21I industrial,2-200's,3-190's,175D,2-D19D's,D19G,WD45,WD,CA,2-UCont.,5015FWA,917,B110,Gleaner F
|
Posted By: ILGLEANER
Date Posted: 16 Sep 2012 at 8:08pm
|
weights for a 160 are like a 185 weight IG
-------------
Education doesn't make you smart, it makes you educated.
|
Posted By: Dave (NE)
Date Posted: 16 Sep 2012 at 8:28pm
|
The weights orange knight had, were a different casting number and didn't quite look like what I needed. Also, he only had five of them, and I need six.
|
Posted By: TimNearFortWorth
Date Posted: 17 Sep 2012 at 8:01am
|
someone is parting out a 160 currently, on E-Slay.
|
Posted By: dpower
Date Posted: 17 Sep 2012 at 1:51pm
|
i thought the 160 only took 5 front weights? Ill check ours when i go out to the farm tonight
|
Posted By: dpower
Date Posted: 17 Sep 2012 at 1:55pm
|
for the ones you have you have to have u need a weight bracket that has the square cut outs for them to work properly
|
Posted By: Dave (NE)
Date Posted: 17 Sep 2012 at 2:03pm
|
Jason, could you also check the casting number so I know that the 255444 is the correct ones. I'm pretty sure about needing six, but a confirmation on that would be appreciated, too. Thanks, Dave
|
Posted By: Elvin
Date Posted: 17 Sep 2012 at 4:00pm
|
Dave, I have 10 0f the 255444 weights. I will sell these or trade you for the 255861 weights that you said you had found elsewhere, Call 785/224-4560.
|
Posted By: dpower
Date Posted: 17 Sep 2012 at 9:27pm
|
6 weights and end in 444. Those weights you have off that 185 are kind of hard to find and make a 220/210/200 look really good. i have a set of them on my 190 xt.
|
Posted By: Dave (NE)
Date Posted: 18 Sep 2012 at 7:50pm
|
Hey, Jason, is there any sort of bar or rod that is used to hold the weights down in place? Just wondering if there was something like that on your one-sixty. Have seen similar on other suitcase weights. Thanks, Dave
|
Posted By: dpower
Date Posted: 18 Sep 2012 at 8:51pm
|
It uses a small inch bar that takes up the space between the weights and the weight bracket. Runs through the 6 weights and one side has a press pin on one side of it and on the other side is a snap pin so you can take that side off.
|
Posted By: ILGLEANER
Date Posted: 18 Sep 2012 at 9:04pm
|
Dave those weights you have are worth more then any other AC suitcase weight out there. IG
-------------
Education doesn't make you smart, it makes you educated.
|
|