D-14 Power Director o-ring install?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=56902
Printed Date: 06 Sep 2025 at 10:48am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D-14 Power Director o-ring install?
Posted By: rrhead(SD)
Subject: D-14 Power Director o-ring install?
Date Posted: 15 Sep 2012 at 2:01pm
I lost the instructions I had saved to install a new o-ring in my D-14's power director shaft. I have the lever off, oil drained and the side cover removed. If anyone can help me with this it would be greatly appreciated. Thanks, rrhead(SD)
-------------
2 WDs,WD45,D-14,D-17,D-19D,180,7020,6080FWA,6080 2wd, 6080 2wd(cab),8050FWA,8550,4W-305,Massey 8250. Gleaner L3, R62 &R65 Agco-Allis 1616H & 1920H, AC 720, Terra-Tiger
|
Replies:
Posted By: DrAllis
Date Posted: 15 Sep 2012 at 2:18pm
|
Just inside the cover there is a setscrew/jam nut just like on the hand lever. Remove it and then the shaft can be moved side to side. Works better when in low range?? or maybe neutral.
|
Posted By: rrhead(SD)
Date Posted: 15 Sep 2012 at 3:08pm
Thank you Dr. Very much appreciated. rrhead(SD)
-------------
2 WDs,WD45,D-14,D-17,D-19D,180,7020,6080FWA,6080 2wd, 6080 2wd(cab),8050FWA,8550,4W-305,Massey 8250. Gleaner L3, R62 &R65 Agco-Allis 1616H & 1920H, AC 720, Terra-Tiger
|
Posted By: DSeries4
Date Posted: 15 Sep 2012 at 10:55pm
I had to make a wrench to fit the jam nut on mine. Couldn't get any swing before.
-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|