Print Page | Close Window

found a 185 with loader what do you all think

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=56846
Printed Date: 06 Sep 2025 at 3:46am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: found a 185 with loader what do you all think
Posted By: CTD03
Subject: found a 185 with loader what do you all think
Date Posted: 14 Sep 2012 at 12:06pm
price is 7800 is this a good price still need to find out hours and if its a gear jumper
 
http://www.allischalmers.com/forum/uploads/6546/allis_chalmers_185.png" rel="nofollow - uploads/6546/allis_chalmers_185.png
 
 
i am waiting on the guy to email me his number
 



Replies:
Posted By: CTD03
Date Posted: 14 Sep 2012 at 12:11pm
The tractor has 2900hrs. On it


Posted By: Longmeadow Farm
Date Posted: 14 Sep 2012 at 3:45pm
Great price. A well running 185 with low hours is a somewhat hard find around here. Lift the front end with the loader/bucket and check for slop/wear in the front end... pivot pins/points, spindles, etc. If you can grease the front spindles and see if any grease oozes from "cracks" ... that would be a plus. And find out if the loader has been on the tractor for the entire 2900 hours. However, if it has a mechanical tach it doesn't show actual hours. So the actual hours could be somewhere between 5k & 6K.  


Posted By: CTD03
Date Posted: 14 Sep 2012 at 8:40pm
well i talked top the man this evening going to call saterday to see if he still has the tractor. i am unable to go check it out this weekend.  He has a couple of guys going to check it out saterday. I sure hope it at the house during the week its about a 2 hr drive to go check it out.
 
the tractor does jump out of gear been on the farm since new and jumped out of gear then he said. His dad put a chain on the handle and never had it happen since??? ( i dont get that?) but i am goint to try to go check it out monday or tuesday.
 
what should i offer or just go with the price.
 
i pasted a up a 6060 with 4000hrs and kicking myself in the butt.


Posted By: Leon B MO
Date Posted: 14 Sep 2012 at 9:28pm
We were lucky enough to find a pretty decent Series 3 XT with a 500 loader. Not welded up or beat up. Needed some minor stuff but only gave 4500.00.
Leon B MO


-------------
Uncle always said "Fill the back of the shovel and the front will take care of itself".


Posted By: DSeries4
Date Posted: 14 Sep 2012 at 9:35pm
Nice looking tractor.  The loader looks to be more faded, so it could be older.  If it really is a gear jumper, that price if really going to have to come down (around 2000 less).

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080


Posted By: CTD03
Date Posted: 14 Sep 2012 at 9:52pm
the tractor is def a gear jumper just seams they never really fixed it. I will call by noon to see if they sold the tractor and make and offer see what he takes
 
thanks guys for the help will keep all posted on what i find out


Posted By: CTD03
Date Posted: 16 Sep 2012 at 10:15pm
he sold it to a local. missed another great tractor.
 
still kicking my butt for passing up the 6060


Posted By: nsula_country
Date Posted: 18 Sep 2012 at 1:04pm
If he got $7000 plus for a gear jumper, then they wanted it badly. Even if it was not a jumper, a 185 with loader would be IMHO no more than $7000 in the south.

Keep Looking!
CT


-------------
2014 LS P7010C, 1962 Farmall 504 Diesel (1st tractor) w/ 2008 Koyker 220 FEL, 1968 Allis Chalmers 180 Diesel, Komatsu PC38UU-2 Excavator, Various attachments for all!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net