Construction and other equipment - engine for HD4 loader

Print Page | Close Window

engine for HD4 loader

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=55652
Printed Date: 31 Oct 2025 at 6:30am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: engine for HD4 loader

Posted By: Don(MO)
Subject: engine for HD4 loader
Date Posted: 21 Aug 2012 at 7:05pm

I'm looking for a good running or rebuild-able d2200 for a 655 or HD4.

Thanks, Don

-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.

Replies:

Posted By: Coke-in-MN
Date Posted: 21 Aug 2012 at 7:13pm

that engine was also use in Cotton pickers and fork trucks , it did also use a turbo in Ag machines and could get upward of 80 HP from the 2200.

-------------
Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel.

Posted By: Randaleky
Date Posted: 22 Aug 2012 at 10:03pm

found a 433 i engine from k2 gleaner 1600 obo. located leesburg ohio, listed in craigslist. hope this will help you. randal

Posted By: dixie12
Date Posted: 01 Oct 2012 at 5:23pm

i have an engine for

ac655 loader comp. rebuilt

Posted By: Don(MO)
Date Posted: 01 Oct 2012 at 5:51pm

Thanks guys for the help, but I didn't get the HD4 loader that i was looking at so I'm not looking for a engine for it now.

-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.

Posted By: Coke-in-MN
Date Posted: 02 Oct 2012 at 8:31am

After having the HD4 loader and also my HD5G - the choice if I had to make it again would be the same . Sell the HD4 and keep the HD5.

Between the two machines the difference is so great in the strength of the unit and the work one can do with them . The 5 may be slower and a few years older but overall it is a lot better built unit and can do twice the work. Is nice having the fwd/rev and torque converter for some jobs but overall the 2-71 engine is easier on fuel , easier to keep in tune and cheaper to repair IF.

-------------
Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel.

Posted By: Mike8cyl
Date Posted: 25 Apr 2016 at 8:02pm

Hey there I may need an engine for my hd4 or a block mine has a pin hole in the side someone goooed it up before I got it the goo came off now it's leaking coolent I'm gonna try to drill it tap it and put in a pipe plug but that rarely works out engine runs great to I'm bummed let me know if you guys know of any a turbo charged one would be bad ass! I've also got a really cool hd7g it's running great but rings are getting tired I got a new head on it and turbo plenty of power just uses oil lol my dad bought it new in 66 got stolen after he died then I tracked it down about 5 years later 👍😎

Posted By: Mike8cyl
Date Posted: 03 May 2016 at 7:10pm

No block required! Pipe plug worked great ! Now I broke the boom lol gotta weld it up tomorrow how do we post pics?