Gas262 in wd45
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=55651
Printed Date: 09 Sep 2025 at 12:46pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Gas262 in wd45
Posted By: farmer_rob
Subject: Gas262 in wd45
Date Posted: 21 Aug 2012 at 6:33pm
|
Picking up a gas 262 and was wondering would it fit in a wd45 with 230? ------------- if farming was easy everybody would be doing it |
Replies:
Posted By: Claus
Date Posted: 21 Aug 2012 at 6:42pm
| Somebody put a 301 Turbo in a 45 so I guess it comes down to how much work your willing to do. |
Posted By: jlogli
Date Posted: 21 Aug 2012 at 6:49pm
|
Time, money and knowledge. ------------- 1945 WC on full steel, WD wide front, WD45 power steering, 1966 D-17IVfactory 3 point.1967 D-17IV SC. 1973 rotobaler white top. orange top roto, model 90 combine,82S, four bottom plow.302 baler. |
Posted By: DaveKamp
Date Posted: 21 Aug 2012 at 7:06pm
|
How 'bout a Fairbanks-Morse Opposed Piston diesel in a CA? (no, I haven't done it...) |
Posted By: Gary in da UP
Date Posted: 21 Aug 2012 at 7:08pm
| Peice o' cake ..... If you have the WD45D adapter plate, flywheel and starter.... those are the biggies but you also need the WD45D radiator, and unless your 262 came out of a D19, you will want the D19 governor and the D19 carb, the Zenith combine version is much larger , but there was a reason the tractors used a Marvel-Schebler. Tractors Don't run wide open continuously. I have one in an unstyled WC, and that presented a little more challenge. |
Posted By: Chris/CT
Date Posted: 21 Aug 2012 at 7:47pm
| I have the 45D adapter plate/flywheel and starter when your ready to proceed. |
Posted By: Lynn Marshall
Date Posted: 21 Aug 2012 at 9:23pm
 Like this?
|