D17 Wide Front Ends? HELP!
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=55530
Printed Date: 18 Aug 2025 at 3:48am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D17 Wide Front Ends? HELP!
Posted By: dishtech43
Subject: D17 Wide Front Ends? HELP!
Date Posted: 19 Aug 2012 at 7:58pm
I have a 58 D17 with narrow front end..I found a Series 4 front end. I was going to buy it.but got too looking at my other D17 series 4,and seen the Yoke comes from the wide front end,and bolts to the Motor adapter plate with 4 bolts...and the D17 58 model, dont have the 4 bolt holes..will the front end work on the series 1 (1958) from the series 4? can anybody tell me what I need to find? thanks in advance..
|
Replies:
Posted By: DrAllis
Date Posted: 19 Aug 2012 at 9:06pm
| Will NOT work as it is.....you'll have to fabricate something at the rear, and on those old D17's they only used 2 bolts instead of four. |
Posted By: dishtech43
Date Posted: 19 Aug 2012 at 9:25pm
| That is what I thought..the only other thing would be change the motor adapter plate between the motor and transmission..that would give me the 4 bolts...well ,looks like too much work..Thank anyway... |
Posted By: SteveM C/IL
Date Posted: 19 Aug 2012 at 9:27pm
| Cleanest way to go is buy the engine adapter hsg off a series 4 and replace yours. |
Posted By: dishtech43
Date Posted: 19 Aug 2012 at 9:57pm
| So I can do that!....I was wondering if it would work..but the front end off the series 4 will bolt onto the series 1 ?? beside having to replace the motor adapter...? thanks |