WD middle steering shaft support.
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=55529
Printed Date: 10 Sep 2025 at 4:17am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD middle steering shaft support.
Posted By: Josh Day
Subject: WD middle steering shaft support.
Date Posted: 19 Aug 2012 at 7:51pm
| The middle steering shaft support that bolts to the frame rail underneath the gas tank is worn out on my WD bad. (as most of them are) is anyone making aftermarkets or is there away to fix it? Thanks Josh |
Replies:
Posted By: ALinIL
Date Posted: 19 Aug 2012 at 8:33pm
| The support can be bored and rebushed. |
Posted By: CTuckerNWIL
Date Posted: 19 Aug 2012 at 8:41pm
The one on my WC was wore real bad on the bottom side so I centered a shaft in it with silicone release agent on it and filled it with epoxy. The shaft was a little rough too and I drove the tractor on the trailer before adding any grease so it opened it up a little for me but it still is way better than it was.
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Bill_MN
Date Posted: 19 Aug 2012 at 10:14pm
|
I bored mine out enough to accept a quadrant bushing
------------- 1951 WD #78283, 1918 Case 28x50 Thresher #76738, Case Centennial B 2x16 Plow |