Another new project
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=55373
Printed Date: 09 Sep 2025 at 7:48am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Another new project
Posted By: CTuckerNWIL
Subject: Another new project
Date Posted: 16 Aug 2012 at 7:50pm
|
The old boss has a 20-35. His son split it last week to fix the slipping clutch and opened up a can of worms. The bevel gear that drives the tranny from the clutch shaft had been loose and messed up the shaft and the bore of the gear. I bored the gear out but couldn't hold the diameter close because the case hardened surface along the keyway and on both front and back faces pushed the boring bar away but it would cut bigger in the middle of the bore. Here was my fix, a long ended air grinder in place of the boring bar. For some reason,I can't get the video link to work??????? http://www.youtube.com/watch?v=FcZccQowf5M&feature=youtu.be I also started making a new shaft cause the old one has the keyway for the gear broke out and it needs to be oversize to fit the bore in the gear. Here is what I got done so far.  More pics- https://plus.google.com/photos/101907304795732239945/albums/5777436723918204033" rel="nofollow - https://plus.google.com/photos/101907304795732239945/albums/5777436723918204033 ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Replies:
Posted By: Orange Blood
Date Posted: 16 Aug 2012 at 8:27pm
|
http://www.youtube.com/watch?v=FcZccQowf5M&feature=youtu.be" rel="nofollow - http://www.youtube.com/watch?v=FcZccQowf5M&feature=youtu.be ------------- Still in use: HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060 Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7 |
Posted By: Orange Blood
Date Posted: 16 Aug 2012 at 8:28pm
|
Now that is farmer engineering right there!!! Nice job ------------- Still in use: HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060 Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7 |
Posted By: CTuckerNWIL
Date Posted: 17 Aug 2012 at 5:29pm
|
I finished the shaft this morning except for the 2 keyways, but didn't take pictures. I guess I'll do that Monday. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Dipstick In
Date Posted: 17 Aug 2012 at 6:03pm
|
Thats the difference between mechanicing and parts changing! Good job!!!! ------------- You don't really have to be smart if you know who is! |
Posted By: CAdon
Date Posted: 17 Aug 2012 at 9:11pm
|
ditto what dipstick said. amazing work again, sir. ------------- 52 CA, 41 B and a little B1 oh, yeah... and an 8N ford snuck in there, too. |
Posted By: Ted J
Date Posted: 18 Aug 2012 at 6:22am
|
Truly amazing work!! GREAT job! If only I had the machinery and then the time to learn! Good luck on the rest of the project.
------------- "Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |
Posted By: MikeinLcoMo
Date Posted: 18 Aug 2012 at 7:13am
| Hats off again to Mr. T!!! |
Posted By: CTuckerNWIL
Date Posted: 20 Aug 2012 at 7:51pm
I finished the shaft today and fit keys to it. The guy that took it apart wanted the gear to fight tight. He might think again when he goes to assemble it. The bore in the gear is size for size to the shaft so he might have to put a little heat on it to get it together. I made the center part of the shaft about .005 bigger than the original cause the throw out slide is wore some. Seems to fit pretty good. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: CAdon
Date Posted: 20 Aug 2012 at 9:39pm
 ------------- 52 CA, 41 B and a little B1 oh, yeah... and an 8N ford snuck in there, too. |
Posted By: dannyraddatz
Date Posted: 21 Aug 2012 at 6:19am
|
Charlie, When are you going to let the members know about your clubs great show, here is the link if you didn't pick up on it in his posting. http://www.ae-ta.com/" rel="nofollow - http://www.ae-ta.com/ Danny ------------- Danny Raddatz |
Posted By: CTuckerNWIL
Date Posted: 21 Aug 2012 at 6:52am
It's listed in the calendar.  ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Allis dave
Date Posted: 21 Aug 2012 at 9:04am
| Great work. I always wished a had someone willing to teach me to be a hobby machinist |
Posted By: CTuckerNWIL
Date Posted: 21 Aug 2012 at 12:15pm
Well my wife says I am NOT a teacher ( she's blonde don't ya know) but if you want, come on over some time and I'll show ya a few things. Most of what I know has been gathered over the last 40 years, so it might take a while to get it out of me ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: GlenninPA
Date Posted: 21 Aug 2012 at 12:30pm
|
Charlie, I would love to spend a day or several with you in the machine shop. My dad took care of all that, it was his profession. He tried to get me into the apprentice program at IR, but I missed out due to my own fault. So my knowledge and skill are sorely lacking. I bought a "baby" lathe with a mill attachment as you reference above, just to learn and make some of the small stuff that floats around in my head. My buddies Keith and Kenny offer advice and simple tips to me, but they are both long-time machinists, so I frustrate them, more than they teach me. I have not forgot your offer, and I just need to send you the package.... Somethings just take me longer than others.... Glenn ------------- Good judgment comes from experience. Experience comes from bad judgment. From listening comes wisdom and from speaking comes repentance. Wise men learn more from fools than fools from the wise. |
Posted By: Jacob (WI,ND)
Date Posted: 21 Aug 2012 at 8:09pm
|
Keep up the good work! ------------- Jacob Swanson 1920 6-12; 1925,1926 20-35 longfenders; 1925,1926 15-25's; 1927,1929 20-35 shortfenders; C; B's; IB; WC's; WD; WD45 |
Posted By: Allis dave
Date Posted: 22 Aug 2012 at 9:48am
| Thanks, If you weren't 4-5 hours away I'd take you up on that offer. We have a fairly nice old lathe over at the farm but no one really knows how to use it. |
Posted By: CAdon
Date Posted: 22 Aug 2012 at 10:04pm
|
charlie, if you weren't 6-7 states away i'd rent a cot in your shop. meanwhile learning plenty right here on the forum. btw you could get a job teaching ag including tractor maintenance in riverside county CA in about 35 seconds under the program that pays me. likely elsewhere as well, but for sure here. not a joke. ------------- 52 CA, 41 B and a little B1 oh, yeah... and an 8N ford snuck in there, too. |