picker shields
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=55281
Printed Date: 09 Sep 2025 at 6:17pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: picker shields
Posted By: Bill_MN
Subject: picker shields
Date Posted: 15 Aug 2012 at 1:15am
|
In thinking about my future 262-WD45 project, I was wondering if they ever made extended picker shields for the longer hood on the 45D? maybe first I should ask, was there a mounted picker that fit the 45D? I would like to have side shields for this project if I ever got around to it, maybe I'll have to make my own.
------------- 1951 WD #78283, 1918 Case 28x50 Thresher #76738, Case Centennial B 2x16 Plow |
Replies:
Posted By: Dave (Mid-MI)
Date Posted: 15 Aug 2012 at 1:37am
| A year or two back, I saw a 45 diesel with a mounted picker at Sumerix Equipment in Lachine, MI. I can't remember if it had shields on it, but you could call them and ask Ivan. He posts on here as auctioneer. |
Posted By: Don(MI)
Date Posted: 15 Aug 2012 at 10:11am
|
Yep. they did make the model 33 picker, adaptable to the WD45D.
Side shields were extended by a hole mesh screen on both sides. ------------- Galatians 5:22-24 "I got a pig at home in a pen and corn to feed him on, All I need is a pretty little girl to feed him when I'm gone!" |
Posted By: WC7610
Date Posted: 15 Aug 2012 at 10:28pm
|
mounting the picker itself shouldn't matter as the frame is the same? If you could find a picture in a manual you could make one. It would get a lot of attention at a show! ------------- Thanks Most Bad Government has grown out of Too Much Government- Thomas Jefferson |
Posted By: Bill_MN
Date Posted: 15 Aug 2012 at 11:22pm
|
would be expensive, but the best result would probably be had by buying two sets of shields and cutting them unevenly so I have 4 longer halves and welding the longer halves together, similar to extending a hood
------------- 1951 WD #78283, 1918 Case 28x50 Thresher #76738, Case Centennial B 2x16 Plow |
Posted By: Don(MI)
Date Posted: 16 Aug 2012 at 7:10am
|
Bill, if you want, I could take pictures from my picker manual. If that helps. ------------- Galatians 5:22-24 "I got a pig at home in a pen and corn to feed him on, All I need is a pretty little girl to feed him when I'm gone!" |
Posted By: Bryan
Date Posted: 16 Aug 2012 at 7:44am
|
Did they make picker shields for the D17 diesel? If so, does anybody have any pics? Thanks, Bryan |
Posted By: Don(MI)
Date Posted: 16 Aug 2012 at 7:45am
|
Not sure, I think I have that manual at home too, will check tonight Bryan. ------------- Galatians 5:22-24 "I got a pig at home in a pen and corn to feed him on, All I need is a pretty little girl to feed him when I'm gone!" |
Posted By: Don(MI)
Date Posted: 16 Aug 2012 at 8:18pm
|
As promised, here ya go Bill and Bryan....
The WD45D, note the difference between the LH and RH side shields...
 This is a comparison between the standard and the diesel (bottom shields) versions..
 This is the D-17 version side shields for the 170 picker
 ------------- Galatians 5:22-24 "I got a pig at home in a pen and corn to feed him on, All I need is a pretty little girl to feed him when I'm gone!" |