Farm Equipment - 210 LOW RANGE

Print Page | Close Window

210 LOW RANGE

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=55088
Printed Date: 10 Sep 2025 at 5:12am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 210 LOW RANGE

Posted By: tbran
Subject: 210 LOW RANGE
Date Posted: 11 Aug 2012 at 9:38am

Help us out, best I can remember the high low is a collar shift on a spline. Have a customer who has issue of shift coming out of low range going down hill.

Any suggestions appreciated.

Replies:

Posted By: ILGLEANER
Date Posted: 11 Aug 2012 at 9:40am

Dont drive on hills.....lol

-------------
Education doesn't make you smart, it makes you educated.

Posted By: Pat the Plumber CIL
Date Posted: 11 Aug 2012 at 10:03am

That's some good advice Dr.Ferguson.LOL How's the arm John , Sorry to rob your post tbran

-------------
You only need to know 3 things to be a plumber;Crap rolls down hill,Hot is on the left and Don't bite your fingernails

1964 D-17 SIV 3 Pt.WF,1964 D-15 Ser II 3pt.WF ,1960 D-17 SI NF,1956 WD 45 WF.

Posted By: DrAllis
Date Posted: 11 Aug 2012 at 10:08am

Yes, a shift coupling very similar to the 4-speed trans. I'd be draining some oil and remove the shift cover off of the right side of the range trans and see if there isn't a bearing bad?? High range is direct drive and low goes thru a countershaft.

Posted By: tbran
Date Posted: 11 Aug 2012 at 12:41pm

THANKS DOC -