Farm Equipment - What gleaners came with the 301?

Print Page | Close Window

What gleaners came with the 301?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=54980
Printed Date: 08 Sep 2025 at 8:57am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: What gleaners came with the 301?

Posted By: 2wise4agm
Subject: What gleaners came with the 301?
Date Posted: 09 Aug 2012 at 6:43am

Just wondering what gleaners had the 301 diesel in them?

Replies:

Posted By: KevinON
Date Posted: 09 Aug 2012 at 6:46am

Off the top of my head, the M series and some L series had the 301 in them.

Posted By: Lonn
Date Posted: 09 Aug 2012 at 6:53am

F and G too.

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot

Posted By: HagerAC
Date Posted: 09 Aug 2012 at 7:23am

Early F2's had a 301 non-turbo also.

-------------
30+ A-Cs ranging from a 1928 20-35, to a 1984 8070FWA, Gleaner R52

Posted By: jiminnd
Date Posted: 09 Aug 2012 at 7:55am

M 2 and some L 2 without hydro, some Gs

Posted By: cotncrzy
Date Posted: 11 Aug 2012 at 8:04am

Had a 1976 M with a 301, it was awsome, 2900 series, 130HP. It was a hydro too...

-------------
C, WD45,WD puller, 185, 200, 7060 Red Belly, 7060 Black Belly,8010, and a R52 Gleaner, AND PROUD OF THEM!

Posted By: tbran
Date Posted: 11 Aug 2012 at 9:30am

F, EARLY F2 UP TO 1977 -2800 -301ci, MOST F DIESEL WERE CAM DRIVEN OIL PUMPS, F2'S WERE CRANK - WE HAVE FOUND A FEW BOTH WAYS AS AN EXCEPTION IN THE 76-77 YEARS, G DIESELS 2900 (190xt), L,M 1972-73 2900 WITH SIMMS INLINE - INDUSTIRAL WITH LARGE OIL COOLERS MARK II L,M STD ENG IN L2 AND M2'S WERE THE DM EQUIPPED ROOSA 6.49 T (7010-8010 TRACTORS) AND A FEW OF THE M3/L3'S HAD THE 6.49I (7020).

Most all the blocks we have found with crank driven oil pumps were drilled for piston cooling whether THE BEARINGS WERE SLOTTED OR NOT. One should not use piston cooling with the cam driven oil pump as there will be a very low oil pressure at idle.

Posted By: darrel in ND
Date Posted: 11 Aug 2012 at 9:35am

Interesting info, tbran. What's the deal on the 301's with the simms in-line. Were they better, worse, no diff? Thanks, Darrel