6080 2wd to 4wd
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=54535
Printed Date: 06 Sep 2025 at 7:15am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 6080 2wd to 4wd
Posted By: BrianC,Ont
Subject: 6080 2wd to 4wd
Date Posted: 31 Jul 2012 at 9:19pm
Do all 6080 2 wd and 4 wd come with the same trans and rearend. Is there just a plug over where the front drive shaft output is. Is this doable If you had all the parts.
-------------
35WC on steel, B with belly mower, D17 puller, D15 Series II puller, D15 Series II with loader, 608 Lawn Tractor
|
Replies:
Posted By: BrianC,Ont
Date Posted: 24 Sep 2012 at 11:22am
bump
-------------
35WC on steel, B with belly mower, D17 puller, D15 Series II puller, D15 Series II with loader, 608 Lawn Tractor
|
Posted By: SteveM C/IL
Date Posted: 24 Sep 2012 at 12:43pm
|
Can't help,but while you're waiting,browse http://www.agcopartsbooks.com" rel="nofollow - www.agcopartsbooks.com
|
Posted By: BrianC,Ont
Date Posted: 24 Sep 2012 at 6:28pm
Steve, I did spend some time on there, and was not able to get any info.
-------------
35WC on steel, B with belly mower, D17 puller, D15 Series II puller, D15 Series II with loader, 608 Lawn Tractor
|
Posted By: bradley6874
Date Posted: 24 Sep 2012 at 7:18pm
yes they are the same however on the bottm shaft from the trans to the ring gear the gear is missing there is 2 different spacers in there it looks like you would need to split her in half and install the gear and correct spacer then the gear box bolts on from the bottom
-------------
You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul
|
|