Farm Equipment - oil loss

Print Page | Close Window

oil loss

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=53636
Printed Date: 11 Sep 2025 at 8:24am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: oil loss

Posted By: doug@shell
Subject: oil loss
Date Posted: 15 Jul 2012 at 6:17pm

im getting hydrolic oil in my gear box on my 190 why

Replies:

Posted By: DougG
Date Posted: 15 Jul 2012 at 6:35pm

In the transmission gear box ?? In the bull gear- gear box ?

Posted By: doug@shell
Date Posted: 15 Jul 2012 at 9:40pm

in the bull gear below stick shift

Posted By: DougG
Date Posted: 15 Jul 2012 at 9:51pm

There are caps on the axles that do come off, , you have to remove the 3 pt hitch arm housing to get there , thats what happened to mine any way

Posted By: MACK
Date Posted: 16 Jul 2012 at 8:14am

I would guess you are talking about transmision? If so it will have to be split. There is a seal behind PD thar has been blown out because the PD seal rings are bad. MACK

Posted By: doug@shell
Date Posted: 16 Jul 2012 at 7:36pm

thanks i found a manual and it looks that way not looking forward to that not a mechanic

Posted By: DougG
Date Posted: 16 Jul 2012 at 9:15pm

Where are you at? Alot of good folks on here, some work on these tractors, could maybe get ya fixed up

Posted By: CAdon
Date Posted: 16 Jul 2012 at 9:22pm

like many of us, you became one when you bought a vintage tractor. but fear not (or not much anyway) you'll get lots of great help on this forum, especially if you can post pictures.

welcome to a group of knowledgeable generous people.

-------------
52 CA, 41 B and a little B1 oh, yeah... and an 8N ford snuck in there, too.

Posted By: BobDinNC
Date Posted: 17 Jul 2012 at 10:02am

CaDon is right. When you buy an old tractor, you become a mechanic, maybe not a good one, but you can learn. My dad was a mechanic and an auto dealer. One time he was describing a man as the best mechanic he has ever known and I asked him for his definition of a good mechanic. His answer was that he always had the right tool for the job and the parts needed to complete the job. There was no time wasted walking back to his tool box or to the parts counter. I think about my dad and that definition every time I make multiple trips to the toolbox or between the garage and the tractor shop or the multiple trips to the parts store. I'm better than I was, but there are friends close by who have been willing to help with things I don't understand.

Posted By: MilesGray (CO/KS)
Date Posted: 17 Jul 2012 at 11:12am

" His answer was that he always had the right tool for the job and the parts needed to complete the job. There was no time wasted walking back to his tool box or to the parts counter."

Having recently split my tractor at both points; I would say that having the proper tools, even if you have to go get them in your shop or tool shed (since we never really know what we might get into with these old tractors) and some qualified help (someone else who has never changed a clutch in a tractor, lol) makes things a lot easier and makes you a good mechanic. Sometimes we have to think outside the box to figure out how to fix something that no longer has parts available, or we have fabricate tools to do the specific job required.

-------------
Miles Gray (CO/KS)

5 1938 B's, 1940 B, 1944 WF C, 1948 NF C, Gleaner A, White Top Rotobaler, 1957 IH Golden Jubilee... I'm either a collector, or crazy!

Posted By: doug@shell
Date Posted: 17 Jul 2012 at 9:21pm

live in shell lake saskatchewan i could use all the help i can get .ill tackal anything once ,it might be fun or not thanks