Print Page | Close Window

Update on 7060 PD Trans Issues

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=53452
Printed Date: 11 Sep 2025 at 2:26pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Update on 7060 PD Trans Issues
Posted By: KevinON
Subject: Update on 7060 PD Trans Issues
Date Posted: 11 Jul 2012 at 9:00pm
Well I changed the tranny filter and cleaned out the suction screen which wasn't very dirty.  I filled with fresh oil.  The old oil looked good on the dipstick, but when pouring out in the light it looked dirty.  I installed a pressure guage at the filter sending unit, and at idle it produced close to 30psi, and at high idle it produced over 60 psi.  The tractor is now functioning again.  The only issue it has is there is a hesitation for a few seconds when taking off in 5th gear, high range, low PD.  Is this normal, or do I have some upcoming PD issues??  Thanks so much for the help, Dr. Allis and MACK, along with others!



Replies:
Posted By: DrAllis
Date Posted: 11 Jul 2012 at 9:18pm
On top of the Power Director valve there is a round plug that takes an allen wrench to remove. Remove this plug and use it to procure a fitting that will fit that hole and get a pressure gauge/hose and check the pressures at full throttle and hot oil....should be 195-205 psi.....by "hot" I mean in the field for an hour or drive it down the road for an hour at top speed. If pressures are acceptable, you may simply have a PD clutch that needs to be resealed and freshened up a bit.


Posted By: MACK
Date Posted: 11 Jul 2012 at 10:20pm
Could also have the torque limiter slipping when you take off in 5th.   MACK


Posted By: KevinON
Date Posted: 12 Jul 2012 at 6:54am
Thanks, guys.  I will do that when I have a chance!  I had thought of the torque limiter as well.


Posted By: michaelwis
Date Posted: 12 Jul 2012 at 7:17am
Sounds to me like torque limiter also . My 7040 had hesitation  now and then .. fixed the torque limiter , problem solved ...

-------------
WD WD45 DIESEL D 14 D-15 SERIES 2 190XT TERRA TIGER ac allcrop 60   GLEANER F 6060 7040.and attachments for all Proud to be an active farmer


Posted By: KevinON
Date Posted: 12 Jul 2012 at 2:53pm
Thanks, Michael!


Posted By: michaelwis
Date Posted: 12 Jul 2012 at 2:57pm
Kevin .. there are ways to fix it w o ....a full blown AC (AGCO ) REPAIR KIT .....

-------------
WD WD45 DIESEL D 14 D-15 SERIES 2 190XT TERRA TIGER ac allcrop 60   GLEANER F 6060 7040.and attachments for all Proud to be an active farmer



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net