e gleaner engine in a WD
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=53201
Printed Date: 12 Sep 2025 at 5:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: e gleaner engine in a WD
Posted By: cotncrzy
Subject: e gleaner engine in a WD
Date Posted: 07 Jul 2012 at 12:14am
Thanks to your help the engine is almost ready to go in. I have the Water pump on pully bored and on but it is out of alignment by 3/4 of an inch or so. I have linkage issues on the combine carb. I need to change it over to tractor linkage, I finally gave up on a used one localy and oredred a rebuild kit with shafts included. I am ready to tackle the gov. I am attempting to attach two pics the second one is side ways, my finger would be the top. one of the plug I think I need to knock out, and one of a threaded adjusting rod???? I need to know more on this, what is it? where does it need to be set? A mechanic that spent his prime at an Allis dealership in the 60's suggested I use the E Gleaner spring. I have parts on order, plan on putting the engine into the tractor tomorow.  ------------- C, WD45,WD puller, 185, 200, 7060 Red Belly, 7060 Black Belly,8010, and a R52 Gleaner, AND PROUD OF THEM! |