Farm Equipment - WD45 DIESEL WITH A 230 6CYL.

WD45 DIESEL WITH A 230 6CYL.

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=52901
Printed Date: 11 Sep 2025 at 5:35pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD45 DIESEL WITH A 230 6CYL.

Posted By: Brian in WI
Subject: WD45 DIESEL WITH A 230 6CYL.
Date Posted: 01 Jul 2012 at 5:10pm

I BOUGHT THIS TRACTOR WITH ENGINE IN. WHAT I WANT TO KNOW IS HOW TO HOOK UP AND DO I NEED FROM CARB. WITCH YES ON RIGHT SIDE TO THE THROTTLE LEVER WITCH FOR THE DESEIL ENGINE NOW. THE ENGINE WAS FROM A COMBINE I WAS TOLD. ANY HELP OR PICTURES WOULD BE GREAT. IF SOMEONE HAS ONE LIKE TO HERE FROM THEM.

Replies:

Posted By: Boogerowen
Date Posted: 01 Jul 2012 at 6:35pm

Well, by George, I have spent about 30 minutes trying to interpret this post, and I am going to give up, can't figger it out, so someone else smarter than me will have to do it .....

Posted By: CTuckerNWIL
Date Posted: 01 Jul 2012 at 6:41pm

I believe he is trying to connect the throttle linkage up to his gas engine and has the parts off the 45Diesel engine. I think he might need a governor off a tractor engine nad probably some linkage parts also.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: CAL(KS)
Date Posted: 01 Jul 2012 at 6:43pm

i think what he is asking is,, the governor is on the left hand side of engine, opposite side of where throttle rod on wd is. how would he hook up to make it work?

well i have a 230 and have comtemplated this,.. first unless is has a tractor gov. it will only run wide open or idle, not much in between. I guess you would have to fabricate something to conect on left side of engine. that is where throttle rod on D19 is.

and throttle shaft is wrong on combine carb unless it has been switched to D19 application?

someone has done this before, im only brainstorming.

good luck

-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20

Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15

Posted By: DrAllis
Date Posted: 01 Jul 2012 at 6:54pm

You basically need governor control stuff from a D19 tractor and probably the carburator too. The rod that goes to the injection pump can be remade to work.