Farm Equipment - 8070 clutch pedal

Print Page | Close Window

8070 clutch pedal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=52776
Printed Date: 12 Sep 2025 at 9:17pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 8070 clutch pedal

Posted By: nebraskagleaner
Subject: 8070 clutch pedal
Date Posted: 29 Jun 2012 at 8:45am

I was trying to spray last night and the clutch pedal on my 8070 would stick down when I would depress it. I would literally have to lift it up to engage and start moving. I took the lower dash panel off and the spring is still fastened. I have'nt had a chance to investigate further. Is there a cable that could be froze up? Where should I look? I will work on it tonight after work. Thanks. P.S. It is a powershift.

Replies:

Posted By: Lynn Marshall
Date Posted: 29 Jun 2012 at 12:55pm

Take both side hoods off and then remove the cookie sheet in front of the fire wall .You can then get at the cable where it fastens to the clutch pedal.Swing the batteries out to get at the other end where it hooks to the power shift valve body linkage.I think that when you get both ends unhooked you will find that you can't move the cable by hand.

Posted By: Unit3
Date Posted: 29 Jun 2012 at 1:55pm

We had a range lever that came out of its holder. It was held in with a zip tie strap. I was a easy fix. Hope yours is painless on the pocket book as well.