D14 original headlight question
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=52682
Printed Date: 12 Sep 2025 at 3:47pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D14 original headlight question
Posted By: Steve(SEMN)
Subject: D14 original headlight question
Date Posted: 27 Jun 2012 at 2:33pm
|
Changed tractor to 12 volt. Does the light separate to change bulb to 12 volt or
is there a sealed beam that works to interchange. Its measures about 4 3/4 lnches.
|
Replies:
Posted By: GregLawlerMinn
Date Posted: 27 Jun 2012 at 5:22pm
I never did find a 12V bulb for my 6V D14 headlights. Ended up getting CA lamps with 12V bulbs. Not original, but close.
-------------
What this country needs is more unemployed politicians-and lawyers.
Currently have: 1 D14 and a D15S2.
With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC
|
Posted By: wfmurray
Date Posted: 27 Jun 2012 at 5:30pm
|
Never could find sealed beam for my 14 . Son put 12 volt battery charger to it ,pulled lights to see if it was hooked up. Blew all bulbs except one on dash .Its been blind for several years. I thank that no bulb is discontuied.
|
Posted By: TedBuiskerN.IL.
Date Posted: 27 Jun 2012 at 8:44pm
Keep it on six volt, use the correct cables, keep things clean, and problem solved!
-------------
Most problems can be solved with the proper application of high explosives.
|
Posted By: DSeries4
Date Posted: 27 Jun 2012 at 8:57pm
I am looking for replacement bulbs as well. No luck so far!
-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
Posted By: MBwcIll
Date Posted: 27 Jun 2012 at 9:11pm
|
It is hard to explain with out pictures. We enjoy the 12V because we use our toy on a regular basis. I cut off the bulb housing and inserted a halagon bulb on the reflector. That way I can use the original housing and lens and have bright light.
|
Posted By: BrettPhillips
Date Posted: 27 Jun 2012 at 9:34pm
|
Agco had the original style 6V sealed beams about two years ago (last time I checked). Be sitting down when you get the price though! To my knowledge, no other sealed beam will fit these lights.
|
|