allis chalmers B rotation help
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=52609
Printed Date: 12 Sep 2025 at 4:22am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: allis chalmers B rotation help
Posted By: tckurt
Subject: allis chalmers B rotation help
Date Posted: 25 Jun 2012 at 5:14pm
|
I am new here and great site and my first post.
I have a allis chalmers b
if you are sitting on the seat of the tractor
can anyone tell me the rotation on the govenor out drive
does it turn left counter clock wise or right clock wise.
sorry for the trouble.
i have mine tore down but it is 20 miles away.
thank you for any help.kurt
|
Replies:
Posted By: Bill Long
Date Posted: 25 Jun 2012 at 8:22pm
|
Let me think. the engines turns clockwise. It is connected to the Cam Shaft which turns counter clockwise. The Cam Shaft is connected to the governor out drive which would make that to turn clockwise looking from the rear. Just an educated guess. The experts can correct me cause I can be wrong. Take good care of my favorite. Good Luck! Bill Long |
Posted By: ron nca
Date Posted: 25 Jun 2012 at 8:34pm
|
Your right on again mister Long . You will get to love this site a lot of good people here . |
Posted By: tckurt
Date Posted: 25 Jun 2012 at 9:12pm
| alright thank you. |
Posted By: Chalmersbob
Date Posted: 25 Jun 2012 at 9:32pm
|
WELCOME to the FORUM. Bring us your problems and questions. The experts are here!
A B is a Great little tractor. Bob
|
Posted By: wbecker
Date Posted: 26 Jun 2012 at 3:08pm
|
But wait. The B engine turns clockwise as Bill said, but that is looking at it from the front, so the govenor turns clockwise as viewed from the front.
So from the tractor seat the engine and govenor turn counter clockwise.
Bill B ------------- Allis B, IB, Low B, G, D10, JD M, 8KCAB, C152 |
Posted By: Dave Richards (WV)
Date Posted: 26 Jun 2012 at 3:51pm
| That is why you time it to the C and not the AC on the fiber gear in the Mag. AC stands for Anti-clockwise and not Allis Chalmers. Boy, don't ask me how I know that!!!! |
Posted By: Dave Richards (WV)
Date Posted: 26 Jun 2012 at 4:08pm
| I think bill becker is correct . Looking from the seat, the rotor turns clock wise, but there is one gear reduction in it so the magneto shaft must turn CC or AC (see above) when viewed from the rear. Another way of looking at it, is when you are checking the impulse, you are turning it clockwise. But that is from viewing it from the front. CC looking at the governor from the back. |
Posted By: steve(ill)
Date Posted: 26 Jun 2012 at 4:26pm
|
http://dueyschutter.freeservers.com/photo6.html" rel="nofollow - http://dueyschutter.freeservers.com/photo6.html ------------- Like them all, but love the "B"s. |
Posted By: Bill Long
Date Posted: 26 Jun 2012 at 9:26pm
|
Guess this older mind forgot that the B engine turned clockwise from the front. You know, if I would have thought a little more remember you crank the B clockwise from the front. Thanks for the correction Bill. Don't like to give bad information on my favorate. Want them running right. Good Luck! Bill Long |