allis's that jump gears?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=52576
Printed Date: 31 Aug 2025 at 10:57pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: allis's that jump gears?
Posted By: XT in pa
Subject: allis's that jump gears?
Date Posted: 24 Jun 2012 at 6:03pm
|
who all has one or more? we have two my XTjumps 3rd down hill dads 180 jumps 1,3,R down hill with a load and 4th up hill or when ya shift into hi range.
------------- 190XT,D17and 7045 |
Replies:
Posted By: CAL(KS)
Date Posted: 24 Jun 2012 at 6:06pm
|
I have XT that jumps 2,3,4. reverse gear is pretty worn but doesnt jump as it was a loader tractor. I am currently tearing down and was planning on posting some pics in the next few days. ------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: DougG
Date Posted: 24 Jun 2012 at 6:09pm
| Got a 180 that jumps 3rd bad the rest all stay in , just put my foot against it;its good ; all though my D21 did once out of 3rd ; i broke a variable speed belt on the Gleaner F combining fescue seed ; had the 21 hooked to it to get it close to the shop ;i was holding it back going down a hill , just slipped it back in and held it ; my wife was in the combine , good thing too , cause she would have freaked and prolly lost it ; i kno of one kid 13 years old that got killed on an XT cause it jumped out and the brakes wer,nt very good and it rolled |
Posted By: dustinmo
Date Posted: 24 Jun 2012 at 6:52pm
| Out of everything I have only have a 190 that jumps 4th, a d14 that jumps 3rd and a h3 6way balde that jumps 2nd and 3rd |
Posted By: Chalmersbob
Date Posted: 24 Jun 2012 at 8:44pm
| I have a CA that jumps out of 3rd, and a D-14 that third doesn't engage. Bob |
Posted By: DSeries4
Date Posted: 24 Jun 2012 at 8:45pm
|
Used to have one until I got it fixed. There seems to be a combination of several items that cause it. Worn shift linkage and forks, worn bearings on the input shaft and output shaft... ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: Eldon (WA)
Date Posted: 24 Jun 2012 at 8:50pm
|
Out of about 60 running tractors, only my 190XT jumps out of 4th (knock on wood).... ------------- ALLIS EXPRESS! This year: |
Posted By: darrel in ND
Date Posted: 24 Jun 2012 at 11:02pm
| My D14's 3rd gear doesn't work at all, my D19 jumps out of 3rd going down hill, the rest of them all work good. Darrel |
Posted By: Ky.Allis
Date Posted: 24 Jun 2012 at 11:30pm
| Guess I'm just lucky. Only have 2 tractors-1963 D-17 ser.3 and 1974 200. Maybe D-17's did not do it so bad-have owned it since 1967 and it's never jumped out of any gear. Have had the 200 since 1976 and same deal-never had a problem. Don't know the hours on the 200 cause the hourmeter(not tach) quit working at 5000 hours even. I would guess it has around 8-9000 hours cause hourmeter quit many years ago. I will say that me or my dad who died 5 years ago have been the only operators since 1976 and we NEVER EVER grind gears when shifting. |
Posted By: MACK
Date Posted: 25 Jun 2012 at 8:05am
| If you would give the gears time to stop turning before trying to put it in gear you would never have a jumpout problem. Driver problem not tractor problem. MACK |
Posted By: D-allis Iowa
Date Posted: 25 Jun 2012 at 8:14am
| I have never had one jump gears that didn't jump gears when I got them. I hav a wd45 diesel that jumps gears but it was that way when I got it. MACK says it right. |
Posted By: Austin(WI)
Date Posted: 25 Jun 2012 at 8:14am
Spot on Mack ------------- "Better By Design" |
MACK wrote:Posted By: KGood
Date Posted: 25 Jun 2012 at 8:33am
| Out of all the tractors grandpa,dad,uncle and I have,we had one 45diesel that popped out of 3rd when he bought it. It's been fine for 30 years. I would like to mention that my buddy has an H that jumps out of 5th and you can't hold it in. It also had other gears that the teeth were broke off. I just think if Allis would of made it so you didn't have to take a bunch of stuff apart just to get the gears out it wouldn't be as big of deal |
Posted By: Austin(WI)
Date Posted: 25 Jun 2012 at 9:12am
|
Our D-17, D-15, and D-14 all popped out of 2nd. When I opened them up to fix them the splines where the collar moves over to engage where wore out. The tractors of are 50+ years old and have had wear and tear. It happens. I bet the stuff they build now wouldn't even last that long. ------------- "Better By Design" |
Posted By: R Aiken
Date Posted: 25 Jun 2012 at 10:44am
| I thought I should get in also, 2 of my CA's and the D14 has bad 2nd gears. My D17 , D19 and all the b's, c's, WC's, and WD's are still good. |
Posted By: Larry in Ill
Date Posted: 25 Jun 2012 at 10:47am
| My CA jumps out of 1st. My C is all good. |