Martin-Seynour Paint
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=52568
Printed Date: 16 May 2025 at 9:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Martin-Seynour Paint
Posted By: In. Fred
Subject: Martin-Seynour Paint
Date Posted: 24 Jun 2012 at 1:43pm
I am looking to paint my WD 45. Wanting to use Martin-Seynour paints, because of contacts with a NAPA store. Do any of you fellows know a good Persian #1 paint code number for Crossfire paint? I think that the paint chip they have for #1 is way off. 
Thanks in advance. Fred
|
Replies:
Posted By: Tony.Or
Date Posted: 24 Jun 2012 at 7:15pm
|
Fred !! When we did the W-patrol the NAPA code was 55A- 3723 , My Son Brian mixed it for me , he has been through the Paint school in Reno at least 2 times. Son Tony & Barb did the painting. It is a dead match for PO #1.
Tony
------------- http://www.tonystractors.com" rel="nofollow - http://www.tonystractors.com |
Posted By: Allis dave
Date Posted: 25 Jun 2012 at 8:21am
|
I painted mine with the 2nd paint chip. I ndon't remember what the number was. It looks really pretty. It's not that orange pumpkin color some guys tell me is persian orange#1, BUT it matches almost exactly with some of the original unfaded paint areas like inside the instrament on my 45.
I used the expensive Martin Seynour self etching primer, than their sealer, then the acrilic enamal paint. Only problem I have is that instead of stratching it chip pretty bad. The primer never chips off, only the paint. I'm not sure if the sealer doesn't stick to the primer or what happened.
|