Print Page | Close Window

B Wide Front End on CA

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=52481
Printed Date: 20 Jul 2025 at 8:14am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: B Wide Front End on CA
Posted By: BJ70
Subject: B Wide Front End on CA
Date Posted: 22 Jun 2012 at 2:22pm
I bought a B with an adjustable wide front-end with the intent of using it to convert my CA from tricycle to wide.  However, once I got the B home I realized I jumped on buying the B before doing my home work; the forward attachment and steering are different between the CA and the B.

This leads to obvious questions:
Can the forward attachment bracket and other unique parts for a CA wide-front end be found?
Is the basic geometry of an adjustable B wide front-end close enough to be fitted to a CA?

Thanks for any help.



Replies:
Posted By: pumpkinman
Date Posted: 22 Jun 2012 at 2:56pm
unbolt the front bolster from each tractor at the front of the motor. swap steering gears .and front ends. if you put the narrow front on the B you will have a narrow  B


Posted By: JarrodACFan
Date Posted: 22 Jun 2012 at 3:14pm
Maybe I am being stupid, but I thought B's only had the wisshbone wide front, not an adj. wide front. Am I mistaken?

-------------
1956 WD45 Narrow Front Factory Power Steering, 1953 WD Wide Front
Allis Express in Muncie, IN


Posted By: CTuckerNWIL
Date Posted: 22 Jun 2012 at 3:18pm
Originally posted by JarrodACFan JarrodACFan wrote:

Maybe I am being stupid, but I thought B's only had the wisshbone wide front, not an adj. wide front. Am I mistaken?

They were available with an adjustable wishbone and later and adjustable front similar to  the CA's.


-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF


Posted By: JarrodACFan
Date Posted: 22 Jun 2012 at 3:22pm
Originally posted by CTuckerNWIL CTuckerNWIL wrote:



Originally posted by JarrodACFan JarrodACFan wrote:

Maybe I am being stupid, but I thought B's only had the wisshbone wide front, not an adj. wide front. Am I mistaken?

They were available with an adjustable wishbone and later and adjustable front similar to  the CA's.



Ok, that makes sense, I just thought that B's with a adj. wide fronts were robbed off a CA at one point or another.

-------------
1956 WD45 Narrow Front Factory Power Steering, 1953 WD Wide Front
Allis Express in Muncie, IN


Posted By: wkpoor
Date Posted: 22 Jun 2012 at 3:26pm
I'm not sure about this. But I think the CA narrowed all the way will still be wider than the B front end. That could essentially make the CA useless.


Posted By: MikeinLcoMo
Date Posted: 22 Jun 2012 at 4:53pm
Adjustable B WFE adjust from 40 inches to 65 inches.


Posted By: Dakota Dave
Date Posted: 22 Jun 2012 at 6:23pm
Unless you change the steering box below the gas tank. it will steer backwards. the gears are cut backwards. at its widest seting it will be just wide enough for a narrow setting on the CA rear. my sugestion is don't do it. you will wind up with a cobbled tractor. either find a C OR CA wide front, or keep it as a narrow front. Buy the way I have both a WF CA and NF C. I can't think of any good reason the switch one over. 


Posted By: Thad in AR.
Date Posted: 22 Jun 2012 at 9:35pm
They don't steer backwards but you have to leave the CA steering arm pointing upwards. I have a C done this way with a B adjustable front. It steers better than any of my B's and turns sharper. It's at a tractor show right now but I'll get pics tomorrow and post tomorrow night. AC made a proto type called the b/c it's in Norms Book.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net