Farm Equipment - D17 clutch shaft lip seals.

Print Page | Close Window

D17 clutch shaft lip seals.

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=52244
Printed Date: 01 Apr 2026 at 5:50pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D17 clutch shaft lip seals.

Posted By: ironac
Subject: D17 clutch shaft lip seals.
Date Posted: 17 Jun 2012 at 7:17pm

I accidently put both lip seals faceing the rear of the tractor and the book says to have them faceing eachother. Will it be ok?

Replies:

Posted By: DrAllis
Date Posted: 17 Jun 2012 at 8:12pm

If you're talking about the foot clutch seals, both should be facing rearward (spring towards the rear).

Posted By: BrettPhillips
Date Posted: 17 Jun 2012 at 8:32pm

Or are you talking about the seals on the transmission input shaft right behind the Power Director clutch pack? If you want to keep the transmission and PD fluids separate, it might be important... Some folks leave these out and treat the transmission, PD, and hydraulic compartments as one. If you have a PD filter like the Series 3 and later, that's probably OK, but I might be nervous about clutch pack shavings getting into the hydraulic system.

Posted By: ironac
Date Posted: 17 Jun 2012 at 8:58pm

Yep those are what I'm talking about. As long as it doesn't leak is what matters.