Farm Equipment - 6060 transmisssion

Print Page | Close Window

6060 transmisssion

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=52157
Printed Date: 15 Sep 2025 at 1:46am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 6060 transmisssion

Posted By: jrjuday
Subject: 6060 transmisssion
Date Posted: 15 Jun 2012 at 10:29pm

I have a 6060 that has started jumping out of 1st gear when under load. Never heard of these trannies jumping out. Anybody got any recommendations?

Replies:

Posted By: DougG
Date Posted: 16 Jun 2012 at 5:30am

Are u positive its going in all the way? ? I bought one that the shifter is a little sloopy, gotta really shove it in there

Posted By: jrjuday
Date Posted: 16 Jun 2012 at 10:03pm

It feels like it is going all the way in, and the shifter isn't sloppy. Just the opposite of the hundred series which stay in gear when pulling, but jump out when backing off from a pull. Have you checked the tapered pin that goes into the side (left) of the shift tower? If it is worn or has backed out part way it will cause the sloppiness you mentioned.