Farm Equipment - 7050 axle wedges

Print Page | Close Window

7050 axle wedges

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=51668
Printed Date: 25 Aug 2025 at 3:18am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7050 axle wedges

Posted By: 7060
Subject: 7050 axle wedges
Date Posted: 06 Jun 2012 at 12:14pm

I have a 7050 that I wanted to put duals on using the cast centers. I have a 7060 and 7030 parts tractor. Would the cast centers off the 7060 work on my 7050 axle. If I remember right the 7050 has smaller axles right?

Replies:

Posted By: SteveM C/IL
Date Posted: 06 Jun 2012 at 1:12pm

Cast centers are the "same" but the wedges have to fit the axle.In other words,you can swap centers around as long as you have wedges for each axle size.

Posted By: 7060
Date Posted: 06 Jun 2012 at 1:14pm

Okay thanks, I figured the centers were the same but wanted to make sure

Posted By: Calvin Schmidt
Date Posted: 06 Jun 2012 at 9:11pm

The axles should all be the same diameter. You will have to have the long axles on your 7050 to make your idea work. If you have short axles you will need the 'Mexican Hat' cast centers for your duals.

-------------
Nothing is impossible if it is properly financed

Posted By: Lonn
Date Posted: 06 Jun 2012 at 9:19pm

The 7050 has 3 5/8" axles long or short and your 7060 would have 3 3/4" or some long axle 7060s had 4". The 7030 has the same diameter axles as the 7050.

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot

Posted By: DrAllis
Date Posted: 06 Jun 2012 at 9:29pm

7010-7020-7030-7050-8010 all had 3 5/8" diameter axles...7040-7045-7060-8030-8050-8070 FWA all had 3 3/4" diameter axles in std length....7080 and 8070 2wd were 4 inch diameter. All rear wheel centers interchange but are not all the same P/N.