Farm Equipment - 185 Hydraulic Issue

Print Page | Close Window

185 Hydraulic Issue

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=51283
Printed Date: 23 Aug 2025 at 4:21am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 185 Hydraulic Issue

Posted By: Davej
Subject: 185 Hydraulic Issue
Date Posted: 29 May 2012 at 12:22pm

Finally got Allis 460 loader mounted on our 185, not an easy task. Cannot see the bucket out of the cab when it is fully extended. After hooking up the hydraulics, we have discovered that the side two lever that controls the bucket will bleed off rather quickly. Does not do it when you change to side one outlets. Looking for answer as to next step in solving this. Really can dig some dirt with a 6' bucket. Thanks

Replies:

Posted By: CTuckerNWIL
Date Posted: 29 May 2012 at 1:05pm

Sounds like you need to fix your control valve.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF