Farm Equipment - generator questions

Print Page | Close Window

generator questions

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=51154
Printed Date: 29 May 2025 at 12:30pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: generator questions

Posted By: Bill_MN
Subject: generator questions
Date Posted: 26 May 2012 at 7:34pm

I have had a rebuilt generator on my WD for 3 years and still haven't gotten it to charge. Took it off today and disassembled and found out it's a 3 brush, Delco 1101413. I had a voltage regulator hooked to it as if it was a 2 brush which I thought it was. Did I damage anything doing this? I know there's a conversion kit for the regulator, what's the purpose of this and how do I hook it up? I got rid of my 3 position light switch and put a regular push-pull in, do I really still need to use the old 3 position switch for the kit? Seems like there's a better way; I'm planning on doing 12v conversion but not yet.

-------------
1951 WD #78283, 1918 Case 28x50 Thresher #76738, Case Centennial B 2x16 Plow

Replies:

Posted By: Coke-in-MN
Date Posted: 26 May 2012 at 8:10pm

generator = 3 brush

http://chevy.oldcarmanualproject.com/electrical/49dr324/1g1251.htm" rel="nofollow - http://chevy.oldcarmanualproject.com/electrical/49dr324/1g1251.htm

full listing for site

http://chevy.oldcarmanualproject.com/electrical/49dr324/index.htm" rel="nofollow - http://chevy.oldcarmanualproject.com/electrical/49dr324/index.htm

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."