HD5B BROKEN AXLE
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=50717
Printed Date: 24 Jun 2025 at 5:16am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: HD5B BROKEN AXLE
Posted By: Bergie
Subject: HD5B BROKEN AXLE
Date Posted: 17 May 2012 at 1:56pm
Does anybody have parts or information on a broken axles on the HD5B? From what I've read, this has been a common problem on the "first design". Can the axle be "updated" with a stronger one, or does somebody have the dimensions to reproduce one?
|
Replies:
Posted By: Coke-in-MN
Date Posted: 17 May 2012 at 2:21pm
Two axles used the small spline and large spline.
-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."
|
Posted By: Bergie
Date Posted: 17 May 2012 at 3:25pm
|
Do you know where to find parts?
|
Posted By: Ages Cat
Date Posted: 17 May 2012 at 8:04pm
|
Axles have been on E-Bay. Also check with Kevin @ Illini who advertises on this website. He has supported me through three rebuilds of an HD3, 615 and I400, plus HD6 parts. There is also the used parts guy in Boise, ID. Parts are available.
|
Posted By: Coke-in-MN
Date Posted: 17 May 2012 at 8:05pm
I looked today but have not found the extra axle i have , Should have 2 of them but somewhere in my junk pile seem to have misplaced them right now , will look later to see if or where they are hiding.
-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."
|
Posted By: Ages Cat
Date Posted: 17 May 2012 at 8:09pm
|
General Gear in Boise. 208-342-8911. He has a lot of Allis parts. We have purchased aftermarket brakes linings, etc. from him.
|
Posted By: wfmurray
Date Posted: 17 May 2012 at 8:21pm
|
Neighbor broke one in HD6 doser . I welded it with 7018 . never heard off it breaking .
|
Posted By: dadsdozerhd5b
Date Posted: 20 May 2012 at 9:25pm
i have a large spline shaft. pm me for more info. thanks
-------------
HD5B, HD5G, (2) FARMALL A's, CUB. DO IT RIGHT THE FIRST TIME, IGNORE THE LAUGHTER. FLANNEL IS ALWAYS IN STYLE.
|
Posted By: orangeman
Date Posted: 21 May 2012 at 4:53am
|
Check with GEMDOZER, he may have one.
|
|