Print Page | Close Window

d14 fluid capacities

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=50396
Printed Date: 11 Aug 2025 at 8:17pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: d14 fluid capacities
Posted By: dscott
Subject: d14 fluid capacities
Date Posted: 10 May 2012 at 11:11pm
Hello fellas
Just hoping someone here knows what the fluid capacities are on a d14. Need to know how much gear oil the trans/diff case takes. Fill/dipstick/vent is missing on mine and have made one just need to know how to mark it.
Thanks Darrell



Replies:
Posted By: John Sealey
Date Posted: 11 May 2012 at 5:49am
Darrel search D14 dipstick I asked this question allready. Someone posted a picture for me. John


Posted By: Gary
Date Posted: 11 May 2012 at 7:47am
This is from my chart for a D-15, but I expect D-14 would be the same.
Perhaps others could confirm.
 
               Radiator: 10 qts.
                 Engine: 4 qts.
                     Fuel: 16 gal.
             Hydraulic: 10 qts.
     Power Director: 8 1/3 qts. 
                  Trans: 14.5 qts.
           Final Drive: 1 qt.
 
     Gary
 


Posted By: dscott
Date Posted: 11 May 2012 at 5:00pm
Thanks John and Gary.
Mine looks like it maybe different, the neck in mine trans takes the same type dipstick as mine hydraulics. Like a small radiator cap. I have already made a dipstick, with the trans apart was pretty easy. Garys 14.5 Qts. should just waht the doctor ordered, fill with 14.5 and mark the stick.
 
                         And all should be right as rain.
 
Thanks again Darrell


Posted By: dscott
Date Posted: 13 May 2012 at 10:42am
Does anyone else have any info on this?
 
              I found that the d15 specs Gary gave do not match what i found here.
 
 
  http://www.tractordata.com/farm-tractors/000/0/1/16-allis-chalmers-d14-engine.html" rel="nofollow - http://www.tractordata.com/farm-tractors/000/0/1/16-allis-chalmers-d14-engine.html
 
 
 
 Says here
 
Cooling is 9 qts
 
fuel 14 gal. 
 
thats all they have for capacities
 
Not that the fuel or water make much difference.
But will the trans/diff capacity be different?


Posted By: dscott
Date Posted: 13 May 2012 at 10:53pm
bump


Posted By: Jordan(OH)
Date Posted: 14 May 2012 at 12:41am
My book shows 14.5 qts. for trans.  10 qts. for PD (same as hydraulics) and .625 for finals.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net