Farm Equipment - Steering Gear Leak on Allis G

Print Page | Close Window

Steering Gear Leak on Allis G

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=50339
Printed Date: 21 Aug 2025 at 6:06am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Steering Gear Leak on Allis G

Posted By: Skuter
Subject: Steering Gear Leak on Allis G
Date Posted: 10 May 2012 at 2:13am

Noticed a leak on my steering gear. Any one know the best way to fill and adjust the "steering gear," (one that is painted over). I checked the aftermarket I & T but the information is lacking.

Am I effed?

Any help appreciated.

Thanks

Skuter

Replies:

Posted By: Tracy Martin TN
Date Posted: 10 May 2012 at 8:49pm

Skuter, it is a Ross steering gear. Pretty simple to adjust. Bearing are adjusted by removing shims. The cross levershaft is adjusted with a set screw in housing cover plate. You must adjust it while turning wheel to extremes right and left. It will get tight at the extremes, because of less wear. If your pin is worn out, I can fix that. HTH Tracy

-------------
No greater gift than healthy grandkids!

Posted By: JoeM(GA)
Date Posted: 10 May 2012 at 9:51pm

Skuter, check your private messages

-------------
Allis Express North Georgia
41 WC,48 UC Cane,7-G's,
Ford 345C TLB

Posted By: Dusty MI
Date Posted: 10 May 2012 at 10:09pm

If needed I can e-mail you a scan of that gear box, it breaks down the parts very well.

Dusty

-------------
917 H, '48 G, '65 D-10 series III "Allis Express"