Farm Equipment - 620 lift cables

Print Page | Close Window

620 lift cables

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=50274
Printed Date: 26 Aug 2025 at 5:08am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 620 lift cables

Posted By: DSeries4
Subject: 620 lift cables
Date Posted: 08 May 2012 at 10:02pm

I am looking at the center lift on my 620. One cable has a bit of fraying at the pulley, but the other side is pretty good.

My questions pertains to the studs that the pulleys sit on. Can the bushings that the pulleys sit on be replaced? Mine have a lot of wear on. It looks like they are part of the stud, am I correct? I took a chisel to it, but nothing moved. Does anyone have any advice to fix this wear?

PS. Does anyone have a plow for a 620 they would be willing to part with? Might like one for mine.

Thanks very much!

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080

Replies:

Posted By: Tracy Martin TN
Date Posted: 08 May 2012 at 10:37pm

DSeries4, I think they can. I put new cables on mine a week ago. Didn't change the pulley, but if it has a bushing or bearing ,unless it was staked in, it should be replaceable. If not it can be made too. Probably a centered part or powdered metal. HTH Tracy Martin

-------------
No greater gift than healthy grandkids!

Posted By: ACJohn
Date Posted: 09 May 2012 at 7:50am

There was a guy just East of Buffalo that had one for sale on SimpleTractors in the classifieds. I had a cable that started to fray so I welded the wires to prevent more fraying.

Posted By: D-17_Dave
Date Posted: 09 May 2012 at 7:35pm

I think the bushing in the pulley is replaceable.

-------------
Yea, I can fix that.....