Farm Equipment - D17 pressure plate

Print Page | Close Window

D17 pressure plate

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=50148
Printed Date: 22 Aug 2025 at 8:15am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D17 pressure plate

Posted By: Kp59
Subject: D17 pressure plate
Date Posted: 06 May 2012 at 3:16pm

Hi I am putting a new clutch in my tractor and can not find the tourq spec for the 6 bolts wich hold the pressure plate to the flywheel any suggestions would be great thanks

Replies:

Posted By: Orange Blood
Date Posted: 06 May 2012 at 3:40pm

you want about 25lbs on them, no more than 30lbs. for sure.

-------------
Still in use:
HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060
Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7

Posted By: CTuckerNWIL
Date Posted: 06 May 2012 at 5:16pm

You can google "torque specs" and look up the bolt size you have. There are charts for every bolt out there.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: Kp59
Date Posted: 07 May 2012 at 3:30pm

Thanks that's what I needed