WD-45 PTO gear box
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=49694
Printed Date: 10 Aug 2025 at 1:42pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD-45 PTO gear box
Posted By: lmc122
Subject: WD-45 PTO gear box
Date Posted: 27 Apr 2012 at 7:11pm
|
The PTO gear on my wd45 is shreaded. I have a 45 WC I've kept for parts, my ? Is there any difference between the PTO gear box on the wc will it work fine on my wd45.
|
Replies:
Posted By: wrightk20
Date Posted: 27 Apr 2012 at 7:28pm
|
my wd service manual says that the earlier pto housings were made out of cast iron and the newer ones were malleable iron. it shows a part number in the book 223708 for the cast iron one. if yours doesn't have that number i would guess it would be the same. kevin
|
Posted By: BennyLumpkin
Date Posted: 27 Apr 2012 at 7:30pm
If it won't work, PM me. I have the whole section of trans from the bellhousing to before the trans with the PTO and will part it out.
-------------
Central PA Allis Express
1934 WC254
1945 WF
1945 WC135755
1951 WD68085
1953 WD45-150217
1957 WD45D-230744D
B110
|
Posted By: JimD
Date Posted: 27 Apr 2012 at 7:45pm
|
Pretty sure they are completely different. The WD and the 45 even had a slightly different box, but were interchangable. I'll bet you need a new intermediate gear too. We have both. JimD
-------------
Owner of http://www.OKtractor.com" rel="nofollow - OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central.
We have new and used parts. 877-378-6543
|
|