Allcrop 60 Draper???
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=49576
Printed Date: 23 Aug 2025 at 2:44am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allcrop 60 Draper???
Posted By: Smitchell
Subject: Allcrop 60 Draper???
Date Posted: 25 Apr 2012 at 8:44am
|
I finally got around to messing with my Allcrop yesterday, but I can't figure out how to tighten my main draper. I don't have a manual to look at either, so if someone could uplad me a picture to show me, it would be greatly appreciated as would any help. Everything else seems to be working fin on it.
|
Replies:
Posted By: TedBuiskerN.IL.
Date Posted: 25 Apr 2012 at 11:04am
There is a lever on the lower roll that tightens the canvas. If tightening that doesn't work, then you will have to loosen it and feed more canvas through the splice where the canvas comes together, so it will tighten with the lever.
-------------
Most problems can be solved with the proper application of high explosives.
|
Posted By: Ken McGregor
Date Posted: 25 Apr 2012 at 11:47am
I'm trying to remember but I think the upper draper had to be flipped up and the canvas fed through the slats joint farther and tightened. When the draper was put back down, it would be tight enough to run. Ted's right on the lower draper but I really think there was no lever on the upper draper. I could be wrong....it's happened before and I don't have a machine handy to check any more.
regards,
Ken McGregor
|
Posted By: Smitchell
Date Posted: 26 Apr 2012 at 11:18am
|
Yes, ther upper draper is working fine by flipping it back as stated, but the levers on bottom of lower one aren't getting it tight. I will try the this tip though, thanks and i will let know if still need futher help.
|
|