Print Page | Close Window

AC 8010 ENGINE PROBLEM

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=49547
Printed Date: 22 Aug 2025 at 3:19am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: AC 8010 ENGINE PROBLEM
Posted By: WD45
Subject: AC 8010 ENGINE PROBLEM
Date Posted: 24 Apr 2012 at 7:59pm
Has anyone installed a 426 engine from a combine to replace the 301 in a late model 8010 with fwd. Appreciate any advise on what has to be done.

-------------
Fred Dunlop, G,B,CA, WC,WF, 3 WD45`s,gas, diesel and LP,U,D10 series III, D12,D14,D15 SERIES II,D17 Series IV in Gas and Diesel ,D19 GAS and D21,170 185,210 ,220 an I-600 8070 fwd, 716H and 1920H



Replies:
Posted By: Wes (VA)
Date Posted: 24 Apr 2012 at 10:16pm
do a search for '8010 426' on top of this page.  You'll get a post thats a week or so old with the same question.  Whats wrong with the 301?   -Wes


Posted By: WD45
Date Posted: 24 Apr 2012 at 10:47pm
Connecting rod for number 5 broke and blew  a hole in the block. Engine is scrap.

-------------
Fred Dunlop, G,B,CA, WC,WF, 3 WD45`s,gas, diesel and LP,U,D10 series III, D12,D14,D15 SERIES II,D17 Series IV in Gas and Diesel ,D19 GAS and D21,170 185,210 ,220 an I-600 8070 fwd, 716H and 1920H


Posted By: Calvin Schmidt
Date Posted: 25 Apr 2012 at 6:15am
Fred, I started a thread on this subject for John when he called. Do a search because there are some good comments.

-------------
Nothing is impossible if it is properly financed


Posted By: Smokey Joe
Date Posted: 25 Apr 2012 at 12:42pm
I put one in a 7020 with minimum issues had to re-drill front plate mounting bolts to the frame rail and radiator had a little difference on the amount of cooling it had a bigger core. As long as you get one out of a tractor you would have everything. From a combine the rear plate,flywheel, and front plate will be wrong, oh yeah plus oil pan is flat with 2 sumps.   Get one from a tractor be alot easier. PM me I have lots of parts.

-------------
210,220,7010 AC,7020 AC,7040 AC,7045 Pedal Tractor, 8050& 8070 and Parts and Pieces of Many More!!!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net