Farm Equipment - Wd45 rebuild how hard?

Print Page | Close Window

Wd45 rebuild how hard?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=49504
Printed Date: 23 Aug 2025 at 4:22am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Wd45 rebuild how hard?

Posted By: Allis-chalmers wd45
Subject: Wd45 rebuild how hard?
Date Posted: 23 Apr 2012 at 9:26pm

How much of a job is it going to be to rebuild my wd45 ?

Replies:

Posted By: XT in pa
Date Posted: 23 Apr 2012 at 9:35pm

not to bad make sure you have a allis service manual not an i.t. manual they are to veg

-------------
190XT,D17and 7045

Posted By: Allis-chalmers wd45
Date Posted: 23 Apr 2012 at 9:39pm

Okay I'll have to pick one up

Posted By: Dave in il
Date Posted: 24 Apr 2012 at 8:36am

Assuming it's not your first overhaul it's not bad. It has wet sleeves make sure the counter bores at the top and the O-ring sealing areas at the bottom of the block are clean and smooth. The front and rear of the pan gasket can be tricky to get sealed but do a search and there are several posts about that. Otherwise it's pretty straight foward stuff. Good Luck.

-------------
AGCO My Allis Gleaner Company