Need IB torque tube.
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=48752
Printed Date: 25 Aug 2025 at 2:11pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Need IB torque tube.
Posted By: Dave Richards (WV)
Subject: Need IB torque tube.
Date Posted: 10 Apr 2012 at 9:38am
|
I will be posting this under classifieds, but this part of the forum gets much more interest. I will spare you the sad tale (for once) and just state that I need an IB torque tube. Will consider parts tractors also. Western PA, Northern Ohio, Dark side of the Moon, don't care, let me know what you have and or can part with. Dave  |
Replies:
Posted By: SteveC(NS)
Date Posted: 10 Apr 2012 at 2:55pm
| C'mon Dave, you can't get away with "I will spare you the sad tale" C'mon tell us all about it. |
Posted By: BrettPhillips
Date Posted: 10 Apr 2012 at 3:32pm
| It must be a VERY sad tale. I know it would be if it happened to me! |
Posted By: Dave Richards (WV)
Date Posted: 10 Apr 2012 at 3:58pm
|
I am only releasing this information because of the request by my good friend from New Scotland. 
|
Posted By: JoeO(CMO)
Date Posted: 10 Apr 2012 at 4:12pm
|
I have been looking for one also! If you find two I would like to get one. Didn't intend on hijacking your thread.
------------- |
Posted By: Dave Richards (WV)
Date Posted: 10 Apr 2012 at 4:20pm
| No offense taken Joe. Is your's broken in the same spot? seems like the only weak place on the tube. |
Posted By: SteveC(NS)
Date Posted: 10 Apr 2012 at 6:45pm
|
Thanks Dave, a pic is worth a thousand words and stick drawings are even better (at least for me!)
Could you not find a cast iron Vulcan who could make it better than new? you did say it was the weakest spot.
I promise if I find 2 I'll send you one (collect shipping).
Good luck.
|
Posted By: orangeman
Date Posted: 10 Apr 2012 at 7:35pm
|
Repair method for broken stabilzer tang - anyone tackled repair of this cast iron part? Have seen several B and C's with this stabilizer tang broken, must have come from rough treatment of these fine machines. Cast Iron Repair might be an option if you cannot find a torque tube. |
Posted By: Steve in NJ
Date Posted: 11 Apr 2012 at 7:32am
Not good Obiwon. The Neighbor had to much of the "Force" with him. Musta' been a pretty large Neighbor.... Sheesh! 
mailto:Steve@B&B" rel="nofollow - Steve@B&B
|
Posted By: JoeO(CMO)
Date Posted: 11 Apr 2012 at 7:37am
|
This being a tractor forum, could it have been "Big Bud"? ------------- |
Posted By: Dave Richards (WV)
Date Posted: 11 Apr 2012 at 8:46am
| I am underwhelmed by the out pour of sympathy. Yes Steve, Buda was definitely from the "Dark Side". From what I read, Joe needs one. Since SteveC said if he finds two he will keep one, I have a feeling there is a story there. In the last few days, I have designed 5 different possible repairs, each one being more complicated and expensive than the last. I think the fix would work on B, C, and CA tubes as well, although replacements for those are still pretty inexpensive. I even have a solution that would shorten a B tube. The fix would be easy except for that *&%$ flywheel in the way. Sooooooooo, if some of you would send me pictures of your broken tang and tube, I will try a prototype fix that will work for all of us. (Except Fred, He drinks Tang and swears his tube is just bent, not broken.) |
Posted By: Steve in NJ
Date Posted: 11 Apr 2012 at 10:28am
I thought Fred said his tube is shaken not stired..... Oh, never mind, that was James Bond. My mistake.  BTW Dave, you need to stay away from people from the Dark side. Its not healthy...
Steve
|
Posted By: Butch(OH)
Date Posted: 11 Apr 2012 at 10:36am
Dave, I dont mean to overwhelm you with sympathy 
but that cartoon you drew up sure made it all worth while, at least for me
 |
Posted By: Dave Richards (WV)
Date Posted: 11 Apr 2012 at 10:42am
|
Poor Fred, with friends like his, who needs enemas. |
Posted By: Dave Richards (WV)
Date Posted: 11 Apr 2012 at 11:09am
 |
Posted By: SteveC(NS)
Date Posted: 11 Apr 2012 at 4:42pm
| No story behind my offer Dave, I'm doing an IB format B with a std. torque tube, but have no real dreams of finding one shorty let alone two! |