200 ALLIS brakes , late ones
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=48667
Printed Date: 26 Aug 2025 at 5:07am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 200 ALLIS brakes , late ones
Posted By: DougG
Subject: 200 ALLIS brakes , late ones
Date Posted: 08 Apr 2012 at 5:48pm
|
Dumb question , does the cover have a pin in the upper left corner , i,ve adjusted many just got lucky and never had to get inside , got the bolts out , used a chisel to get it started , pried about a half inch and it wont budge any more , looks like a pin or something welded to the cover , bout 10 lbs of dirt etc fell out , the problem is when you step on the right brake it locks up , it unlocks but theres no slight braking , just lock up
|
Replies:
Posted By: MACK
Date Posted: 09 Apr 2012 at 8:06am
|
Yes there is a pin that goes through cover. MACK
|
Posted By: Dave (Mid-MI)
Date Posted: 09 Apr 2012 at 9:54am
|
The pin is probably rusted to the cover.It is a slip fit into the cover and the housing. I had the same problem with my brakes locking up several years ago. Dr. Allis said to take them apart, lube the balls with high-temp grease, and replace all springs. I thought the springs looked OK, so I didn't replace them. The next spring it was locking up again. I replaced the springs this time, and regreased the balls. The following spring, it was locking up again. I have found that if I drag the brakes while slowly backing up, It solves the problem until the tractor sits again for a long period.
|
Posted By: Hurst
Date Posted: 09 Apr 2012 at 11:17am
|
I just wish someone would make the discs aftermarket... 7000 uses the same ones and only AGCO offers them ($$$$)...
Hurst
-------------
1979 Allis Chalmers 7000
5800 Hours
|
|