Farm Equipment - c oil pickup tube

Print Page | Close Window

c oil pickup tube

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=48509
Printed Date: 26 Aug 2025 at 4:50am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: c oil pickup tube

Posted By: Ricky G
Subject: c oil pickup tube
Date Posted: 05 Apr 2012 at 9:06am

does oil pick up tube have a curve in it or suppose to be straight
mine has a curve in it anyway found out mine is cracked were it screws in to the block
when i tried to remove it it broke off in the block now have to try
and remove broken piece all the pictures i have seen shows it being straight
working with a basket case some one else tore a part original problem no oil pressure

Replies:

Posted By: GregLawlerMinn
Date Posted: 05 Apr 2012 at 9:23am

All that I have seen were straight. Have a few in the shop (with the pickup end); yours for $5 plis postage. If no oil pressure, check that the pin in the back of the cam is intact; the oil pump shaft has a slot that goes over the pin...broken pin=no oil pump drive. (Been there, done that)

PM me if interested.

-------------
What this country needs is more unemployed politicians-and lawyers.
Currently have: 1 D14 and a D15S2.
With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC

Posted By: Ricky G
Date Posted: 05 Apr 2012 at 9:47am

replaced the oil pump drive pin looked ok