Farm Equipment - WC gearshift pin ?

Print Page | Close Window

WC gearshift pin ?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=48382
Printed Date: 02 Apr 2026 at 2:58pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WC gearshift pin ?

Posted By: Thad in AR.
Subject: WC gearshift pin ?
Date Posted: 02 Apr 2012 at 7:27pm

I need to replace the gearshift pin on my unstyled WC. I welded the groove shut and cut a new groove but the pin is a little sloppy in the shift tower so I want an over sized pin. Are they the same as wd b and c? Also sometime back I saw an aftermarket fix for the wc shifters. does anyone know where to get one? one last thing I need the long skinny rod that goes from the lockout lever by the shift knob down to the pivot point on the lower side of the shifter.

Replies:

Posted By: CTuckerNWIL
Date Posted: 02 Apr 2012 at 8:09pm

I bent up my own "new" rod for the reverse lock out release. I think I need a new OS pin for my shifter in the 35 also.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: norm[ind]
Date Posted: 02 Apr 2012 at 8:55pm

WE STOCK THE OVERSIZE PINS 1-574-342-4545