Construction and other equipment - valve clearances on ad344 engine

Print Page | Close Window

valve clearances on ad344 engine

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=48280
Printed Date: 09 May 2024 at 9:54pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: valve clearances on ad344 engine

Posted By: buda262t
Subject: valve clearances on ad344 engine
Date Posted: 31 Mar 2012 at 8:49pm

I need the intake and exhaust valve clearances and sequence for AD344 engine in a 145 motor grader.

Replies:

Posted By: Ian Beale
Date Posted: 01 Apr 2012 at 5:44am

Buda262t

FWIW

We have big brother (Forty Five) which we've just mobile. (Some posts earlier on here and at ytmag. Will eventually do a summary of getting it rolling with some part numners etc we found that "aren't serviced" but are available.)

516 Buda supercharged - which should be 2 more pots on yours.

Service manual says .012 intake and .015 exhaust.

No idea on the firing order for a 4 cylinder but you can work this out by watching the rocker sequence.

And that 262 - have a friend looking for parts for a DD (Australia) -any connection?

Ian