Farm Equipment - Hydraulic Slipping on 5050

Print Page | Close Window

Hydraulic Slipping on 5050

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=48150
Printed Date: 28 Aug 2025 at 2:44am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Hydraulic Slipping on 5050

Posted By: variscora
Subject: Hydraulic Slipping on 5050
Date Posted: 29 Mar 2012 at 8:00pm

Howdy folks...have an early 80s 5050...noticed the bucket was slowly dropping with a load in it (very slow). I checked the hydraulic fluid and it was a little low, so I added until it came up to normal on the dipstick. Bucket with a load is still slipping.

Any ideas? Am I looking at replacing the hydraulic pump?

Thanks much ahead of time...

Replies:

Posted By: DSeries4
Date Posted: 29 Mar 2012 at 8:45pm

You might want to see that the loader cylinder seals are not leaking first. Those can lower your load.

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080

Posted By: MACK
Date Posted: 29 Mar 2012 at 9:51pm

Pump don't the load, the control valve holds the load. MACK