WD45 gas cap and oil gauge
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=48049
Printed Date: 28 Aug 2025 at 12:18pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD45 gas cap and oil gauge
Posted By: 79fordblake
Subject: WD45 gas cap and oil gauge
Date Posted: 27 Mar 2012 at 7:37pm
Anybody experience problems with aftermarket gas caps? I bought one for my WD45 from the farm store....fit nice and snug...unlike the old wore out one that flops around. I thought the problem was solved...went to put gas in it today and it went swsshhh...so that means its not letting the tank vent. I threw away my receipt already...I put the old cap back on.  Where can I get a good one?Also wondering if anybody has experimented if the aftermarket oil gauges are accurate? I need a new one and don't know if I should go with one that says Allis-Chalmers on it or just get a 0-30psi gauge. I have a aftermarket temp gauge that I am fairly pleased with...from what I have read they read a tad hotter than what the tractor really is...at operating temp mine shows well within the green mark. |
Replies:
Posted By: norm[ind]
Date Posted: 27 Mar 2012 at 8:00pm
| WE HAVE GAUGES--OIL--GAS CAPS ALL USA MADE 1-800-254-3116 |
Posted By: Ted in NE-OH
Date Posted: 27 Mar 2012 at 8:01pm
It could be that the gas cap lets air into the tank but not out, so it could be building up pressure in the tank which won't hurt you.
------------- CA, WD, C, 3 Bs, 2 Gs, WC, I-400, 914 |
Posted By: wdforty5
Date Posted: 27 Mar 2012 at 8:25pm
My nice shiny chrome gas cap does the same thing on my 45...but she runs fine. Im hopin maybe she'll drink a little less gas  ------------- "Old Iron...built to last" |
Posted By: 79fordblake
Date Posted: 27 Mar 2012 at 8:27pm
| Well I may put it back on and try it then...lol. |
Posted By: Kip-Utah
Date Posted: 27 Mar 2012 at 9:57pm
|
Have both the generic (no name) and the ones that say Allis-Chalmers on my tractors. Either style works just fine ------------- HANSEN'S OLD ORANGE IRON. Showing, Pulling, & Going!! |
Posted By: JimD
Date Posted: 27 Mar 2012 at 10:00pm
|
Actually, yes, the caps are not supposed to be vented any more. Lovely EPA regs. I tend to drill a tiny hole in them to make sure. They usually will not pull a vacuum though and work fine even if they allow a little pressure to develop. JimD ------------- Owner of http://www.OKtractor.com" rel="nofollow - OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central. We have new and used parts. 877-378-6543 |