Simplicity Broadmoor question
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=47867
Printed Date: 07 Jun 2025 at 12:05pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Simplicity Broadmoor question
Posted By: Ben (MI)
Subject: Simplicity Broadmoor question
Date Posted: 25 Mar 2012 at 6:32am
|
I have an issue with my pint sized Allis. I have a 1998 Simplicity Broadmoor with a 38" deck. I removed the deck and when I went to put it back on the spring attached to the belt tensioner pulley had come off. It is still attached to the tensioner pulley arm but I cannot figure out where to attach it to the second point. I looked at parts diagrams online and checked the manual but there was no help. I monkeyed around with it for an hour, normally it takes 2 minutes to put the deck back on. Where does the spring attach? Thanks for any help you may be able to provide.
|
Replies:
Posted By: jiminnd
Date Posted: 25 Mar 2012 at 8:32am
|
Can't help but I have a JD (sorry) and did the same, very small hole in top of deck it attaches too so maybe yours does too.
|
Posted By: Dick L
Date Posted: 25 Mar 2012 at 9:03am
|
I have three of them around somewhere. I think one is in a building setting on its rear with the front wheels in the air. I think 14 or so years ago I removed the break drum from it. I will take my camera with me to the farm later today and if no one gets you the information before and the spring is still intact I will post a picture. The other two are blocked in to where it will take an act of congress to get them out.
|
Posted By: AMB(wcIL)
Date Posted: 25 Mar 2012 at 9:06am
|
Theirs a small hole the spring attaches to in the mower deck its shelf. The hole is kinda long shaped, seems to me its in the middle. Andy
|
|