Where to run the taillight wire?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=47708
Printed Date: 30 Oct 2025 at 7:28pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Where to run the taillight wire?
Posted By: JarrodACFan
Subject: Where to run the taillight wire?
Date Posted: 22 Mar 2012 at 6:50am
|
I am curious to know where the taillight wire was originally ran on a CA. We are about ready to put the platform back on, and I would like to get it where it needs to be so I don't need to take the platform back off. Thanks, JarrodACFan ------------- 1956 WD45 Narrow Front Factory Power Steering, 1953 WD Wide Front Allis Express in Muncie, IN |
Replies:
Posted By: Dakota Dave
Date Posted: 22 Mar 2012 at 7:34am
| The light Wire comes out the bottom of the instrument panel under the strip screwed to the top of the transmition. Then it cuts across to the left side trhought a hole in the support and up throught the fender support. |
Posted By: CTuckerNWIL
Date Posted: 22 Mar 2012 at 8:18am
|
Dad's 51 CA#669 never had a transmission cover for the taillight wire that I know of. He bought it new in 1951
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: mnoonan-NEWI
Date Posted: 22 Mar 2012 at 12:51pm
Picture for you if the link works. ------------- AC CA, Ferguson TO-20, Ford NAA, M-M BG, AC #3 Mower, SC Plow, PH Digger, AC 720's with Ark 700 loader & Brantly Backhoe, "Mini B" w/flathead Ford V8 |
Posted By: CTuckerNWIL
Date Posted: 22 Mar 2012 at 2:14pm
That is the location of the picture on your hard drive. We can't see it. If you don't know how to post it, send it to me in an email. My email is listed in my profile. Charlie ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
mnoonan-NEWI wrote:Posted By: Dakota Dave
Date Posted: 22 Mar 2012 at 4:15pm
Your correct no wire cover on a CA. Just a C and B., here is a picture. You notice I have no wire to the left side. only to the right since I had a combo work tail light I took the left tail light off. Its easy to route the wire with the platform on since its not attached anyplace.
|
Posted By: JarrodACFan
Date Posted: 22 Mar 2012 at 6:18pm
Okay, I see the groove where it needs to be ran, thanks. If it would have been a snake, it would have bit me!  ------------- 1956 WD45 Narrow Front Factory Power Steering, 1953 WD Wide Front Allis Express in Muncie, IN |