Farm Equipment

Print Page | Close Window

WD 45

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=47412
Printed Date: 29 Aug 2025 at 5:29pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD 45

Posted By: pssilseth
Subject: WD 45
Date Posted: 16 Mar 2012 at 8:47pm

Do you know if the shaft that the hand clutch rides on is threaded into the casing or is it a solid piece? (Bought this old tractor in much worse condition than I could have ever imagined.) This shaft was increased in diameter by welding on and then ground down, and now handle is sloppy. So can the shaft be replaced?

Does anyone know where to get info on side delivery rakes/roll-r-bar rake? I was given a rake and it needs a little work, but we can not figure out the manufacturer. If I put a couple pictures on here could someone point me in a direction?

Thanks for any thing you can do, I will be asking a lot more in the future.

Paul

Replies:

Posted By: MACK
Date Posted: 16 Mar 2012 at 10:11pm

The pin is pressed into housing. Some come out easy some are tight. MACK

Posted By: David G.
Date Posted: 16 Mar 2012 at 11:04pm

Put some pics on here, somebody can surely figure it out and get you pointed in the right direction.