Urch....anyone have some NOS brake linings?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=47350
Printed Date: 29 Aug 2025 at 10:08am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Urch....anyone have some NOS brake linings?
Posted By: Eldon (WA)
Subject: Urch....anyone have some NOS brake linings?
Date Posted: 15 Mar 2012 at 5:34pm
Work has come to a halt on the 175 brakes. I thought I had enough NOS linings to do another tractor, but found that I need the 5.5" diameter rings and the bands. Local AGCO dealer doesn't stock anything! Called the shop in Portland that was recommended and they don't stock them either....and I don't want Tisco brand....
-------------
ALLIS EXPRESS!
This year:
|
Replies:
Posted By: Dave in PA
Date Posted: 15 Mar 2012 at 5:41pm
|
Call Sandy Lake in PA! They might/will, help out, they are good, have lots of stuff!
|
Posted By: Eldon (WA)
Date Posted: 15 Mar 2012 at 5:46pm
I will, but too late for today. Thought I would ask on here in the meantime.
-------------
ALLIS EXPRESS!
This year:
|
Posted By: Dave in PA
Date Posted: 15 Mar 2012 at 5:53pm
|
I have talked to Brenda, in the past, bought stuff there. BUT, anyone can, and will help out, THEY ARE GOOD! They, will do anything needed to help out! But, as we all have seen in the past posts here, they "might", be loosing some things?? I am not going there!! Give them a call, I am sure that they will do their BEST for you, or give ya a clue what to do!
|
Posted By: Eldon (WA)
Date Posted: 15 Mar 2012 at 5:58pm
Yeah I ordered the springs and some other stuff from them last month.....
-------------
ALLIS EXPRESS!
This year:
|
Posted By: Chris/CT
Date Posted: 15 Mar 2012 at 7:22pm
|
I have rings and bands here if you cannot find any. Rivets I have here are to long I think, my lining guy and I keep missing each other for swap. PS Not NOS, good quality from lining supplier friend of mine. He sells only quality materials.
|
Posted By: Eldon (WA)
Date Posted: 16 Mar 2012 at 9:05pm
Chris I pm'd you. Put the tractor back together with the best parts I had. I think 1/16" on the facings will get me thru this year....and at least I know things will come apart a whole lot easier next time. I replace two of the long hydraulic lines with better ones while I had things apart....a pretty simple job when the final drive is off...
-------------
ALLIS EXPRESS!
This year:
|
|