Farm Equipment - One Sixty PTO/Clutch

Print Page | Close Window

One Sixty PTO/Clutch

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=47274
Printed Date: 29 Aug 2025 at 2:46pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: One Sixty PTO/Clutch

Posted By: geb
Subject: One Sixty PTO/Clutch
Date Posted: 14 Mar 2012 at 9:13pm

My One Sixty pto turns all the time unless hooked to an implement. Also impossible to put pto in gear with the implement hooked and with the tractor running. Any Help? Thanks

Replies:

Posted By: geb
Date Posted: 15 Mar 2012 at 8:43am

bump

Posted By: stray
Date Posted: 15 Mar 2012 at 6:47pm

I'm not real familar with the 160, but lookin at the parts manual it has a 2 stage clutch, halfway in disengages the tractor movement and all the way in also disengages the pto. I would guess that either a clutch adjustment or new clutch if it can't be adjusted out. That should take care of the not being able to put the pto in gear.

-------------
1969 190XT series 3

Posted By: Tony.Or
Date Posted: 15 Mar 2012 at 7:26pm

Jeb ! Rebuild the clutch assembly before you ruin something. There are some parts in the 2 stage clutch that are NOT available any more.

I bought the last pressure plate they had several years ago , be careful with what you have.

Good luck Tony

-------------
http://www.tonystractors.com" rel="nofollow - http://www.tonystractors.com

Posted By: Fred in Pa
Date Posted: 16 Mar 2012 at 6:40am

Did you remove inspection plate and adjust the PTO clutch .Do this frist .Not all of your adjustment is outside on clutch rod.