WC Frame Rails
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=46819
Printed Date: 30 Aug 2025 at 9:37pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WC Frame Rails
Posted By: Steve in NJ
Subject: WC Frame Rails
Date Posted: 07 Mar 2012 at 6:57am
| Does anyone know if a set of frame rails from a styled WC are the same as its unstyled cousin? |
Replies:
Posted By: Redwood
Date Posted: 07 Mar 2012 at 7:20am
| I believe the agco site lists them as the frame, but also list a base frame for the 201 power unit. If you look there you should be able to confirm. |
Posted By: CTuckerNWIL
Date Posted: 07 Mar 2012 at 7:41am
|
Yes they are the same. If anybody could find any difference in them, I would like to see it.
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Kip-Utah
Date Posted: 07 Mar 2012 at 10:46am
|
We used some from an unstyled 38 on a styled 39. They appear to be exactly alike. Some earlier WC's used smalller bolts for the front pedestal than later tractors, but they are in the same location so they just need to be reamed out to the larger size if using them with a later pedestal. Interestingly the late unstyled rails that we used even had all the holes needed for the generator mount?! Going from Styled rails on an unstyled tractor everything should bolt right up. Kip ------------- HANSEN'S OLD ORANGE IRON. Showing, Pulling, & Going!! |
Posted By: Fred in Pa
Date Posted: 07 Mar 2012 at 11:02am
| I am parting out a WF maybe you can use them parts on something ? ? |
Posted By: Steve in NJ
Date Posted: 07 Mar 2012 at 12:39pm
Nah. Can't use the rails from that. They're to SHORT....
|
Posted By: Unstylish
Date Posted: 07 Mar 2012 at 12:49pm
|
How much for the rear end? ------------- The problem with reading MLPANKEYS posts, is that they dont make boots that tall. |
Posted By: Darrell G (MN)
Date Posted: 07 Mar 2012 at 1:55pm
| Steve why would you capatalize the word Short, thats and invintation for ole Fred to get on you about being vertically chalanged. |
Posted By: B26240
Date Posted: 07 Mar 2012 at 2:48pm
| Kip is probably right on the bolt holes, other than that the only dif I know of in any of the frame rails is the air cleaner cutout on the left side rail of the RC |
Posted By: Calvin Schmidt
Date Posted: 07 Mar 2012 at 9:07pm
|
I don't blame you Fred. That WF looked fairly rough ! You likely have a lot tied up in storage by now. LOL ------------- Nothing is impossible if it is properly financed |
Posted By: Steve in NJ
Date Posted: 07 Mar 2012 at 10:45pm
| Thanks guys! |
Posted By: Steve in NJ
Date Posted: 08 Mar 2012 at 6:55am
|
Big D,
Do you really think that's gonna entice him to say somethin' like that? He doesn't need any invitation. It just rolls out pretty easily. He's always hard on me and Harvey. But I'm tough, I can take it! LMAO!!
 |
Posted By: gary ny
Date Posted: 08 Mar 2012 at 8:25am
| Steve What do you need I can help you out .I have two 1 styled and one unstyled. email me |