WD Carb
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=46356
Printed Date: 25 Aug 2025 at 9:45am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD Carb
Posted By: AC Nut
Subject: WD Carb
Date Posted: 27 Feb 2012 at 8:44pm
|
Where would I find a carb kit for an older WD? I went to a local fleet store and bought what I thought was a carb rebuild kit as marked "WD". Appears gasket doesn't fit and some parts aren't the same. Is there a serial number stamped on the carb somewhere? Thanks.
|
Replies:
Posted By: CAL(KS)
Date Posted: 27 Feb 2012 at 8:49pm
|
a MS carb with have a circular tag held by a rivet with numbers.... TSX---
not sure how it is on a zenith but it will have numbers also
somone can probably tell you what a WD carb # should be but i dont know offhand ------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: stu(ON)
Date Posted: 27 Feb 2012 at 10:08pm
Here is the tag on a Zenith 9707
 |
Posted By: Chalmersbob
Date Posted: 27 Feb 2012 at 10:26pm
|
Allis used a Zenith or a Marvel -Schebler on a WD. You have to know which one you have before you can get parts. They usually have their name on the carb. Bob |
Posted By: JimD
Date Posted: 27 Feb 2012 at 10:28pm
|
We carry the kits. Give me a call tomorrow and we can help you identify it. JimD ------------- Owner of http://www.OKtractor.com" rel="nofollow - OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central. We have new and used parts. 877-378-6543 |
Posted By: Steve in NJ
Date Posted: 28 Feb 2012 at 6:15am
|
The WD used both the Zenith small bore or the Marvel Schebler small bore carbs. You'll find the tag riveted to the fuel bowl on the Zeniths in most cases as in Stu's picture. The tags (if legible) will show the AC P/N on the outside, and the Zenith number on the inside around the rivet. On the M/S carbs, the tag is usually riveted to the side of the fuel bowl opposite of the fuel inlet. As Cal mentioned, the Marvel numbers start off with TSX-XXX and three digits afterward. The TSX-154 or 159 were popular M/S carbs for the WC applications. Large bore Marvels usually have their ID tags under the mounting flange. We offer kits, parts, and rebuilding services if interested... HTH mailto:Steve@B&B" rel="nofollow - Steve@B&B |